2011 nissan frontier pro4x mild expedition build

[Mo4130]

Well I am finally somewhat settled back in the east coast, after an awesome cross country trip! Once I get everything sorted out, I will get all my pictures up. I know I said I would get some fridge pics up and well as my new rack set up, and I will I just need to get a little set up. Back on the east coast and looking forward to checking some stuff out! Stay tuned.

 

[Mo4130]

I have finally got around to reviving this old post and I have a lot to cover.
Dual battery install
New driving lights.
Home made Full extension locking drawer storage.
Fridge install
On board camp shower
CB radio install
Awning relocation
Hard mounted navigation install
Assorted electrical do dads
On board air install
"Low" profile rack install on the cab.

I think that about covers it. Fore warning I have a bad habit of just installing stuff and not taking pictures cause I just get into a groove. But I will do my best to talk people through the steps.


Sent from my iPad using Tapatalk

 

[jhberria]

Looking forward to seeing what you did with the OBA install. That's going to be my next project.

 

[Mo4130]

This was the fuse block I added For basically everything in the front of the vehicle. Driving lights, floods, extra usb plugs in cab, the CB and so forth. Pretty easy install.

Basically a rechargeable tac light that I hard mounted in cab so I always have a flash light readily accessible. And always charged.

 

[Mo4130]

Cables for dual battery install. Got it on amazon. 0/2 gauge welding cable. More than capable of handing the amperage. Not shown is my automatic charge relay that is hooked up on the other side of my battery/onboard air/ fuse block box. The blue seas ACR auto charge relay had a remote switch in cab that allows me to isolate or parallel if needed.

Also show is my Arb compressor. I cut a whole in the middle for my compressor fitting.

Sent from my iPhone using Tapatalk

 

[Mo4130]

Here is a better shot of the battery box I made. Pre arb compressor install


Sent from my iPad using Tapatalk

 

[Mo4130]

As the truck sits right now.



Sent from my iPad using Tapatalk

 

[Mo4130]

A couple of shots from a little trail ride a couple weeks ago. Did about 100 miles up in the green mountain national forest. A good time!





Again up in vt with the wife.

 

[Mo4130]

On my other over landing rig. Out by Montauk New York. Not a bad view.


Sent from my iPhone using Tapatalk

 

[ahill2213]

You wouldn't have happened to write up some plans for that drawer system? I would love to do something like that.


Sent from my iPhone using Tapatalk

 

[Mo4130]

You wouldn't have happened to write up some plans for that drawer system? I would love to do something like that.


Sent from my iPhone using Tapatalk

I don't have plans written up. But the drawers were a super simple setup. Take your measurements make your cuts and make sure it's square. He biggest cost incurred were the full length locking slides. They were about 200 a pair.


Sent from my iPhone using Tapatalk

 

[hovenator]

Awesome truck!!! I ended up in a 2016 Frontier pro4x of the same color. You still like the OME setup?

 

[Mo4130]

Awesome truck!!! I ended up in a 2016 Frontier pro4x of the same color. You still like the OME setup?

Thanks!!! I couldn't be happier!! I wish I had gone with the hd springs to begin with
Vise changing from the Md to the hds. I have about 60k on the suspension and it's been awesome.


Sent from my iPhone using Tapatalk

 

[Mo4130]

Just some shots from over the past couple months. It’s been a whirl wind year. Moved, bought a house and had a kid all within a month.

 

[Mo4130]

trucks most likely going up for sale. Stand by for updated pictures and list of included parts.