2012 LR4 TPMS

[harbinger808]

Aloha Everyone,
After having put on Compo's and BFGKO2's I've been very happy but they were consistently losing pressure weekly. Had the valve seals replaced put original TPMS. Personally, I really don't care if I have this feature as I check my pressure every Monday. What would be the best way to "lose" this feature?... I have a IIDtool that I recently bought that can help with everyone's consensus.
Mahalo

 

[Colin Hughes]

Disable it in the software.

 

[zelatore]

Yes, I ditched the TPMS since I never run at OEM pressures - either higher on the street (E-rated tires) or lower on the dirt. I just shut it off with the GAP tool.

 

[harbinger808]

Thanks for the heads up Colin and Zealtore. I'll look into the menus this arvo and disable the TPMS system.

Yes, I ditched the TPMS since I never run at OEM pressures - either higher on the street (E-rated tires) or lower on the dirt. I just shut it off with the GAP tool.

 

[ex10psi]

Sorry to resurrect this old thread but i found it doing a search.

Can someone definitively tell me if I can disable the stupid TPMS sensor using the IIDTool on a LR4? I see it on IIDTool's website instructions for the LR3, but none for the LR4 so I am not sure if it's possible for the LR4.

If so, please share the procedure or the parameters i need to change in the CCF setting/feature of the tool. there are a lot of options to chose from and I dont want to **** something up, thank you!

 

[harbinger808]

Sorry to resurrect this old thread but i found it doing a search.

Can someone definitively tell me if I can disable the stupid TPMS sensor using the IIDTool on a LR4? I see it on IIDTool's website instructions for the LR3, but none for the LR4 so I am not sure if it's possible for the LR4.

If so, please share the procedure or the parameters i need to change in the CCF setting/feature of the tool. there are a lot of options to chose from and I dont want to **** something up, thank you!

not sure what i did when i started this thread but i do remember contacting the GAPIID tool guys and they helped me through it.

 

[DiscoDavis]

Yeah, email them. They have always helped me out with technical questions

 

[keeper1616]

I just did this last week on my 2013.

It's under BCM-Body Control. There are two settings, I set them both to None and the warning went away.

 

[ex10psi]

this is great, thank you all!