2015 RAM 3500 DRW to SRW conversion - what backspace is needed?
- Thread starter ATCws
- Start date
Copperhead14
Observer
Contact First attack fire apparatus in Indiana. He will be able to help you on wheels.
thx, Copperhead!
ttengineer
Adventurer
I’m pretty sure on a newer Ram the axle length is negligibly larger on a DRW. We are talking millimeters not inches.
I want to say it’s less than an inch difference. Which when you consider it’s centered the same you’re looking at less than half an inch on each side.
If so, Id run the same wheel on all 4 corners.
Sent from my iPhone using Tapatalk
I want to say it’s less than an inch difference. Which when you consider it’s centered the same you’re looking at less than half an inch on each side.
If so, Id run the same wheel on all 4 corners.
Sent from my iPhone using Tapatalk
Buliwyf
Viking with a Hammer
There's these guys as well. Never dealt with them though:
https://www.dbldesign.com/wheels-tires
https://www.dbldesign.com/wheels-tires
thats what I've read on an AEV forum also. someone said it was a 1/2 inch difference in length in total.
according to their website, looks like they only deal with the RAM 4500/5500
looks like they're only dealing with RAM 4500/5500 trucks.
ttengineer
Adventurer
If it is ½” difference, then you’re looking at a quarter inch side to side. That’s like 7mm.
Run the same wheel on all 4 corners and save yourself money and headache.
Sent from my iPad using Tapatalk
