Was just updating the first post with the latest upgrades that are installed and realized I hadn't changed it in a year. Quote a few new upgrades installed recently, mostly driven by having the Super Pacific installed now.
- Super Pacific Switchback X1
- Front Runner Load Bars
- Battleborn 100Ah 12v Heated LiFePo4 battery
- 2x 100 watt Renogy solar panels
- Victron Lynx Distributor
- Victron SmartSolar 100/30
- Victron Blue Smart IP22 Charger
- Victron Smart Shunt 500A
- BlueSea Battery Disconnect
- BlueSea Fuse Block
- RakAttach Swing Hitch (custom 2.5" insert - found used)
- Yakima HD Bars on cab roof (likely to be removed - too much wind noise)
- Rhino Rack Batwing Awning (Passenger Side) and three awning side walls
Some of these items (namely the electrical system) were done quickly and not as tidy as I'd like, largely driven by the deadline of leaving for a 2 week trip we took at the beginning of July across Colorado. I finished the night before we got on the road. Many of those wonky wiring runs were dictated by pre-made wires and lugs. We ventured to Telluride for the July 4th weekend, followed by Ridgway State Park and Ouray, Silverton, Durango, Molas Lake, Black Canyon of the Gunnison, and wrapping up with an Airbnb in Crested Butte. And while the electrical install isn't pretty (which you'll see below and some of you may cringe), it worked flawlessly and V2 is in the works. You can even see from the photos that the rooftop arrangement has already been altered since the trip to be more streamlined. I didn't like the Yakima Rocket Box up there and it was largely useless once the roof was popped.
Go ahead, call my baby ugly. We only had one 12v outlet and two USB ports wired up for the trip, but they worked well to keep the ARB fridge running and my CPAP running at night, plus recharging various devices. The beauty of the SP is the ability to hide the wiring in those wiring runs, which I'll get to over the next month or two. I plan to use some of their molle panels for v2. With the system, I debated about adding a DC to DC charger, but it many ways the IP22 charger makes it moot. The IP22 is designed to be plugged into shore power, which works well for campgrounds when we have electric (rare). Plus, it can be plugged into the 400W outlet in the bed of the truck. It has multiple charging rates (7.5A, 15A, and 30A) and I'm able to leave it plugged in and just toggle it on and off from the cargo outlet button in the cab. I expected that I would only be able to use the 15A setting since a full 30A will take it over the 400W rating, but I've found that when I have it set on 30A it just regulates itself down to around 20A-25A based on what the truck lets it pull from the outlet. Most nights on our trip, we used about 20% of the battery ~20Ah. The solar generally had it charged back up by 11am given the Colorado sun, but even on a few of the cloudy days it was back to 100% by 1pm. If we had really needed it, while driving, just flipping on the IP22 would have gotten us back to full in less than an hour, especially since it can take the amperage from both the solar and the IP22 charger simultaneously.
During the trip, we headed up to Yankee Boy Basin outside of Ouray to take a look at wildflowers (clearly not in this photo though). This really just gives an idea of how it looked during our trip. Again, you can see the disorganized wires from the solar panel running down the front of the camper. Again, that will be cleaned up and properly routed soon. Another cool thing about the SP is that under the front overhang are two holes drilled into the camper to run solar wires to the interior.
It's late here, I'll add a few more details at some point in the next few days.