'89 GMC Suburban restoration/build up project.
- Thread starter dieselfuel
- Start date
dieselfuel
Adventurer
Thank you very much!
chilliwak
Expedition Leader
I wrapped this up tonight. Eventually I'll add mounts for gas cans, propane tank, and the hilift but for now it's done.
I've still got other things to do before heading off to Moab for a week, 5 days away.
Now thats a sweet bumper!:drool:
dieselfuel
Adventurer
Thanks chilli!
We took the dogs up to Kolob Reservoir in southern Utah over the weekend. We were looking for some cool fall colors but found ourselves a week or two late... Down around Zion the colors were vibrant and beautiful but up at 8000' the aspens had already dropped their leaves for the year.
Being Halloween, the dogs were showing off their new costumes. Roxy was a turtle, Zoey a bumblebee and Hank makes a convincing skunk.
Daisy got to play in a little bit of mud, the water was high this year. Last year we parked near the rocks in the background on the peninsula that is now an island.
One thing that I need to change about the suburban is the gas pedal. My ankle cramps up after 3-4hrs of driving. As a result, my wife drove part of the way home. She looks good behind the wheel of my truck.
We took the dogs up to Kolob Reservoir in southern Utah over the weekend. We were looking for some cool fall colors but found ourselves a week or two late... Down around Zion the colors were vibrant and beautiful but up at 8000' the aspens had already dropped their leaves for the year.
Being Halloween, the dogs were showing off their new costumes. Roxy was a turtle, Zoey a bumblebee and Hank makes a convincing skunk.
Daisy got to play in a little bit of mud, the water was high this year. Last year we parked near the rocks in the background on the peninsula that is now an island.
One thing that I need to change about the suburban is the gas pedal. My ankle cramps up after 3-4hrs of driving. As a result, my wife drove part of the way home. She looks good behind the wheel of my truck.
Last edited:
dieselfuel
Adventurer
Last weekend Daisy and I cruised out to Logandale to check out the Vegas Valley 4 Wheelers 34th annual Hump N Bump. I was supposed to be out there at 7am for a drivers meeting to run a trail with them but I've been sick so that didn't happen. I cruised out there a little later to spectate and visit with friends. Daisy got to play in the sand for the first time, it was fun!
Damn, I missed it!!
Then I saw that missile test fire on the way home, out in the desert on a back road with no other cars around for miles. I freaked out! Haha!
Damn, I missed it!!
Then I saw that missile test fire on the way home, out in the desert on a back road with no other cars around for miles. I freaked out! Haha!
Last edited:
Seanmiller063
Observer
Awesome build ao far!
onemanarmy
Explorer
is that a rubber pad on the bumper under where the latch is?
did you get all the bumper build parts from Ruff Stuff?
and how it the world did you figure out that the baffling had killed the fuel pump? no way you knew that immediately.
did you get all the bumper build parts from Ruff Stuff?
and how it the world did you figure out that the baffling had killed the fuel pump? no way you knew that immediately.
dieselfuel
Adventurer
It's Delrin, a high density plastic.
Yep.
Dropped the tank and looked inside to find the baffle sitting sideways in there and the pump dangling by the wires. I knew immediately that I had lost fuel pressure, I've heard and felt that happen before. Didn't know about the baffle til I dropped the tank.
norcal*PWRstroke
Adventurer
love this build, awesome work start to finish. I used Delrin on my tire gate bumper as well. it holds up very well!
dieselfuel
Adventurer
Thanks man!
dieselfuel
Adventurer
I don't think the baffle caused all my issues but it definitely had a part in the last issue out of the trail.
Thanks man, I'll keep the updates coming.
I'd love to have it painted by summer, hoping I can make that happen.
dieselfuel
Adventurer
Here's a small update for you guys. I got some new bump stops for the front end, what a huge improvement! The old poly ones only compressed 1/2" or so, these compress about 2" and are softer.
I had to build new spacers to bolt them onto the truck, using what I had laying around I came up with these.
The only way to tell if they're working is to go out and use them! So I stuck my GoPro to the inner fender and took her for a spin. You can barely tell when you hit these things, no more harsh bang when I bottom out. Some guys have been using Timbrens for a while now and Timbren recently caught on and started marketing their parts to be used as bump stops. I've talked to guys using both on different rigs and they all say these work just as well. The cool part is that these are $18/ea on Amazon. For the cost involved (a grand total of $49) I'm thrilled with them.
https://youtu.be/1gespgQqXYQ
I had to build new spacers to bolt them onto the truck, using what I had laying around I came up with these.
The only way to tell if they're working is to go out and use them! So I stuck my GoPro to the inner fender and took her for a spin. You can barely tell when you hit these things, no more harsh bang when I bottom out. Some guys have been using Timbrens for a while now and Timbren recently caught on and started marketing their parts to be used as bump stops. I've talked to guys using both on different rigs and they all say these work just as well. The cool part is that these are $18/ea on Amazon. For the cost involved (a grand total of $49) I'm thrilled with them.
https://youtu.be/1gespgQqXYQ
