I'm hoping to get some advice on selecting a 1st gen 4Runner. I've been combing Craigslist for a while and casting a wide net (I'm willing to travel for the right one). I live in Massachusetts but I'm about to head to California for a month, and I'm hoping to find a nice rust-free 4Runner there and drive it back to Mass (I'll be oil coating it yearly). I have very little first-hand mechanical experience, so I want to be sure I have as much possible knowledge on what to look for if I do find one to test drive. I want to learn more about mechanics, but I don't have any friends or family who know what they're doing so I have to try and learn as much as I can online....
Im looking for a mostly-stock 1st gen MANUAL 4Runner with little rust. It will be a daily diver (my commute is about 7-10 miles round trip) but be able be used to haul around wood and other building materials when I need. Since I will be driving it from CA to MA, it needs to be able to cross the country somewhat reliably. My max price is around $5000, if it doesn't need a ton of work right away. I plan on building out the back with a sleeping platform for road trips. I don't plan on off-roading but there are some seriously potholed roads around where I live...
Here's an ad that just went up, and I thought you all might be able to look it over and tell me what you think.
https://humboldt.craigslist.org/cto/5234225438.html
In case that is taken down soon, here's the text and photos:
--------
325,000 miles
4x4
Manual
4 cylinder
Clean title
This has been my daily driver for over 3 years.
The truck originated in Placerville, and has only seen one winter on the coast. I spot-treated a few small dings for rust, but otherwise the vehicle is rust-free.
Pro's:
-Professionally resurfaced head gasket repair this spring (I have all documentation)
-New Master Cylinder
-Shocks 1.5 years old
-WARN front locking hubs
-3" lift in the rear to level the body
-Toyo off road tires at about 60%
-New exhaust manifold
-New distributor cap
-No modifications, all stock
-Never been "mudding" only a work truck
Cons:
-Cosmetically bad inside, showing it's true age
-Needs front-end work soon, tires are feathering
-Truck has been smoked in and near the forest fires this summer (smells like a campfire)
-Small dent in tailgate, rear window still works
I have to pick up the title in Sacramento, along with all documents, and I will be ready to sell this weekend.
No trades. Please don't waste my time tire-kicking, I work out of town.
If you're an enthusiast this truck is primed for customization.





--------------
I'm not too concerned about the inside cosmetics- I can always get seat covers and new mats to spruce it up, and I'm pretty handy with a needle and thread and re-upholstering if I really need to. The feathering tires could just mean it needs a new alignment, or it could be the whole front suspension. Anyone have experience on the price range of suspension work on 1st gens? I'm willing to put more money into it once I buy it, but I don't want to suddenly be digging myself a deep hole. It's got pretty high mileage but a recently resurfaced head gasket makes me feel better about that...
Does this look like a pretty solid deal? Any advice on this truck and what to look for in any other 4runners would be very helpful.
Thanks all!
Elena
Im looking for a mostly-stock 1st gen MANUAL 4Runner with little rust. It will be a daily diver (my commute is about 7-10 miles round trip) but be able be used to haul around wood and other building materials when I need. Since I will be driving it from CA to MA, it needs to be able to cross the country somewhat reliably. My max price is around $5000, if it doesn't need a ton of work right away. I plan on building out the back with a sleeping platform for road trips. I don't plan on off-roading but there are some seriously potholed roads around where I live...
Here's an ad that just went up, and I thought you all might be able to look it over and tell me what you think.
https://humboldt.craigslist.org/cto/5234225438.html
In case that is taken down soon, here's the text and photos:
--------
325,000 miles
4x4
Manual
4 cylinder
Clean title
This has been my daily driver for over 3 years.
The truck originated in Placerville, and has only seen one winter on the coast. I spot-treated a few small dings for rust, but otherwise the vehicle is rust-free.
Pro's:
-Professionally resurfaced head gasket repair this spring (I have all documentation)
-New Master Cylinder
-Shocks 1.5 years old
-WARN front locking hubs
-3" lift in the rear to level the body
-Toyo off road tires at about 60%
-New exhaust manifold
-New distributor cap
-No modifications, all stock
-Never been "mudding" only a work truck
Cons:
-Cosmetically bad inside, showing it's true age
-Needs front-end work soon, tires are feathering
-Truck has been smoked in and near the forest fires this summer (smells like a campfire)
-Small dent in tailgate, rear window still works
I have to pick up the title in Sacramento, along with all documents, and I will be ready to sell this weekend.
No trades. Please don't waste my time tire-kicking, I work out of town.
If you're an enthusiast this truck is primed for customization.





--------------
I'm not too concerned about the inside cosmetics- I can always get seat covers and new mats to spruce it up, and I'm pretty handy with a needle and thread and re-upholstering if I really need to. The feathering tires could just mean it needs a new alignment, or it could be the whole front suspension. Anyone have experience on the price range of suspension work on 1st gens? I'm willing to put more money into it once I buy it, but I don't want to suddenly be digging myself a deep hole. It's got pretty high mileage but a recently resurfaced head gasket makes me feel better about that...
Does this look like a pretty solid deal? Any advice on this truck and what to look for in any other 4runners would be very helpful.
Thanks all!
Elena