monark192
Observer
Our 2003 Aliner Sportliner on its first trip since the lift.
![P1020302c.jpg P1020302c.jpg](https://expeditionportal.com/forum/data/attachments/191/191096-204c21c574258b09a138eee351574319.jpg)
Close up of larger (14 vs 13") wheels with new All Terrains (195/75R14).
![photo (15)a.jpg photo (15)a.jpg](https://expeditionportal.com/forum/data/attachments/191/191139-bec6e272677529c5101eebcef577e0b8.jpg)
Timbren system being welded on - 4" lift with 3500lb spindles and 2000lb springs (Timbren part # ASR2KHDS03) to match trailer GVW. There was an additional 2" spacer added between frame and suspension to give the desired lift. Original system was a torsion set up that would bottom out leaving our driveway.
![photo (16)a.jpg photo (16)a.jpg](https://expeditionportal.com/forum/data/attachments/191/191140-535e3eda25f57b5dcf50f5c20121dfe4.jpg)
Before shot.
![Trailer before.jpg Trailer before.jpg](https://expeditionportal.com/forum/data/attachments/191/191141-b9817860f770ef7bb09bfb05efa1a6b0.jpg)
Additional mods:
Harbor Freight tongue box.
5 LB propane tank on mount from SoCal Teardrops.
Fender wells painted black using spray on bedliner from rattle can.
Still to come:
Rally Armor mudflaps.
Better nose wheel - original is now too short.
New stabilizing jacks as originals are too short - suggestions??
![P1020302c.jpg P1020302c.jpg](https://expeditionportal.com/forum/data/attachments/191/191096-204c21c574258b09a138eee351574319.jpg)
Close up of larger (14 vs 13") wheels with new All Terrains (195/75R14).
![photo (15)a.jpg photo (15)a.jpg](https://expeditionportal.com/forum/data/attachments/191/191139-bec6e272677529c5101eebcef577e0b8.jpg)
Timbren system being welded on - 4" lift with 3500lb spindles and 2000lb springs (Timbren part # ASR2KHDS03) to match trailer GVW. There was an additional 2" spacer added between frame and suspension to give the desired lift. Original system was a torsion set up that would bottom out leaving our driveway.
![photo (16)a.jpg photo (16)a.jpg](https://expeditionportal.com/forum/data/attachments/191/191140-535e3eda25f57b5dcf50f5c20121dfe4.jpg)
Before shot.
![Trailer before.jpg Trailer before.jpg](https://expeditionportal.com/forum/data/attachments/191/191141-b9817860f770ef7bb09bfb05efa1a6b0.jpg)
Additional mods:
Harbor Freight tongue box.
5 LB propane tank on mount from SoCal Teardrops.
Fender wells painted black using spray on bedliner from rattle can.
Still to come:
Rally Armor mudflaps.
Better nose wheel - original is now too short.
New stabilizing jacks as originals are too short - suggestions??
Last edited: