Alu-Cab Canopy Camper
- Thread starter BDRXO
- Start date
s.e.charles
Well-known member
they jump from 10 to 15 quick, eh?
Gary crouch
Observer
Ya....sure does. At first i thought it was just higher priced but add the options and its quite a significant jump, but Alucab makes quality kit so likely your just paying a premium for quality.
BDRXO
Supporting Sponsor / Approved Vendor
Where in Canada are you?
BDRXO
Supporting Sponsor / Approved Vendor
We don't have exact weights yet, but I believe they were targeting around 350lbs. The bed with both font and rear platforms down is 48" wide and 105" long and the high density foam mattress is 3" thick.
BDRXO
Supporting Sponsor / Approved Vendor
Sorry...no planned figment kit for VWs
Clinton Morse
New member
Is there a standard location that the backup camera gets moved to on the canopy camper? Is the stock camera removed from the tailgate? Or would one have to get an aftermarket camera and tie it into the wiring harness?
BDRXO
Supporting Sponsor / Approved Vendor
If you wanted to maintain a backup camera you would need to go aftermarket since removing the tailgate (which includes the OEM camera) is mandatory for install.
Clinton Morse
New member
Thanks - I realize removing the tailgate is mandatory, I was just curious if anyone had removed the OEM camera and remounted on a camper shell and/or done a new camera tied into the wiring harness. I'll keep poking about..