Aluminum aircraft riveted truck camper frame

[Pdidh]

Truck camper frame for sale, one of a kind all riveted aluminum built like an airplane.


10 ft flatbed
86.25”tall
92” cab over
96” wide

Asking 12k

 

[Victorian]

How much? Does it come with anything else?

 

[Pdidh]

I’m asking 32,000 but I’d consider offers. Frame only , but it’s buck riveted which took a lot of man hours.

 

[Pdidh]

Lowering to 15,000 . Just want to get out of this and recoup some of my losses. My loss is your gain. I don’t think you could get an aircraft aluminum buck riveted frame this size for 15k anywhere else. And this is Alclad 2024 T3 aluminum not the cheap stuff. Need to sell fast due to circumstances.

 

[2wheel-lee]

After investigating their method of construction, I researched doing it myself using the same materials. The cost of materials that were used adds up fast, but it does seem the right way to do it, if you're going to go down that path. Are you able to get the sheets to finishing skinning it? Sorry that you got stuck in that situation.

 

[Pdidh]

I'm hoping to sell it as is. If I don't get at least 15k for the frame I'll probably turn it into a long term project I work on slowly. If that happens then I'd slowly look into skinning it my self.

 

[DirtWhiskey]

Looks like one of the Dynamo camper frames? Did they fail to deliver or something?

 

[Pdidh]

Looks like one of the Dynamo camper frames? Did they fail to deliver or something?

It was made by dynamo but beyond that I'm not allowed to comment.

 

[DirtWhiskey]

It was made by dynamo but beyond that I'm not allowed to comment.

Sounds spicy. Sorry to hear that. Where are you located? Does it come with the temp rolling frame?

 

[Pdidh]

The frame is in Stuart Florida for now, ideally I’d like to have a buyer before it gets to me (I’m in amarillo) so I can have it shipped directly to the buyer. It may actually get picked up in Stuart today.
Comes with the dolly frame and supports. This type build isnt strong until the skin is on so it has to come with the rolling frame.

 

[plh]

looks beautiful, timing isn't right for me. Generally, what would this fit on?

 

[Pdidh]

looks beautiful, timing isn't right for me. Generally, what would this fit on?

would fit any 1 ton long bed or larger. Would probably work on a 3/4 short bed with some modification to the truck.

the frame is now in amarillo Texas and I’m lowering price to 12k

 

[billiebob]

Watching but wow, I just want to see where this ends up. Kinda like a Reverse Dutch Auction.

 

[Pdidh]

Lowering to 10k

 

[Pdidh]

Lowered to 7k