![IMG_20120429_132108.jpg IMG_20120429_132108.jpg](https://expeditionportal.com/forum/data/attachments/69/69178-20ffd8ca3a0c4635d7529fb6a6ff07d7.jpg)
2 inch square tube for frame and 1 1/2 rails
![IMG_20120429_132053.jpg IMG_20120429_132053.jpg](https://expeditionportal.com/forum/data/attachments/69/69179-a641a0dbf721bad2b5909fb28dbf014c.jpg)
Measured so that it is a full 4ft x 6ft inside
![103_0066.jpg 103_0066.jpg](https://expeditionportal.com/forum/data/attachments/69/69180-1bc4c9d7cf94101a60bbaf0ba45f0b3c.jpg)
mounting 1750 lb springs
![103_0072.jpg 103_0072.jpg](https://expeditionportal.com/forum/data/attachments/69/69181-d49e5e41679286d50128ec532f1d86ac.jpg)
weld in spindles; running stock JK wheels with 1.5 inch spacers
![103_0070.jpg 103_0070.jpg](https://expeditionportal.com/forum/data/attachments/69/69182-6fa2f1462b10f38aaec2d2293ade4378.jpg)
![103_0108.jpg 103_0108.jpg](https://expeditionportal.com/forum/data/attachments/69/69184-95cf0534334839743f2bbc2eaa2f4a1a.jpg)
and it's a roller!!
![100_2350.jpg 100_2350.jpg](https://expeditionportal.com/forum/data/attachments/69/69186-229dfca6a77d516c010b7cbe59ecdcff.jpg)
I plan on making the front corner panels hinge open/close like a door; that's why it is left open in the pic. You always need something that is way in the front of the trailer.
![103_0158.jpg 103_0158.jpg](https://expeditionportal.com/forum/data/attachments/69/69189-47b765d589f5d9531fab473d916611e2.jpg)
![103_0159.jpg 103_0159.jpg](https://expeditionportal.com/forum/data/attachments/69/69191-cd7cb164e2beb431c69be9156e743291.jpg)
Planning on making a full lid to cover.
![100_2354.jpg 100_2354.jpg](https://expeditionportal.com/forum/data/attachments/69/69192-37ac119d161d13df4fda85a295a8281b.jpg)
The tailgate will fold down and can be removed if wanted/needed.
I am very happy how it has turned out. Of course, it will never be "finished"!
I wanna thank flyn2er for helping me with the build. He was the brains behind most of the design. I just cut, ground, and welded.
Thanks Tom!
Hoping to get rack built for a Cascadia Vehicle Tent to camp here on the "right coast'.
I want to have it set up with a CVT for the All-Breed Jeep show in York, Pa next month!!
Last edited: