Rubicon_Fan
Adventurer
Sorry, fixed 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Any more room for M101 builds? My "RubiChaser" build.
- Thread starter Rubicon_Fan
- Start date
teotwaki
Excelsior!
Can you please share their product name? I've looked at lever latches, compression latches, adjustable latches, paddle latches, cam latches and everything else I could think of.
Rubicon_Fan
Adventurer
Ugh, that's a tuffy. I have to bring up my paper work to give you a bit more details on these. I'll try to dig more info.
Sent from my iPhone using Tapatalk
Rubicon_Fan
Adventurer
Here are some pics of the trailer from inside
Gas shocks as well as weld one DIY home made brackets
Hope this gives you an idea.
I'm got a quote from lineX $600 to bedline my trailer bed!!! I may have to hold it off for now. Too expensive.
Sent from my iPhone using Tapatalk
Gas shocks as well as weld one DIY home made brackets
Hope this gives you an idea.
I'm got a quote from lineX $600 to bedline my trailer bed!!! I may have to hold it off for now. Too expensive.
Sent from my iPhone using Tapatalk
xcmountain80
Expedition Leader
I've had good results in the past with DIY bedliner. I'm going to make a go at the roll in stuff, as I can't find a financially feasible way to do the spray in myself. I did (my dad) paint our M416 and it turned out good all things considered. You lid is likely to be copied by me when I get the funds for the metal and labor. Looks good.
A
Woodchuck
New member
Seriously:Wow1: I had the interior of my Jeep and my entire Tuffy security box sprayed with Line-X for $610. I did have to completely strip the interior myself, but $600 for the tub of a trailer is just ridiculous!!! Thanks for the pics.
leadsled01
New member
I have used "raptor" spray in bed liner made by " U-POL". Purchase the kit it comes with the gun and everything you need. Very durable and fairly easy.. I have also used "duraliner" roll on liner. Bought the kit but it didn't come with the reducer, it looks cheap and hasn't held up very good. Nice build! Can't wait to start my build..
gasman
Adventurer
ya i was qouted 700 for just the tub.. forget that,, i did the tub.lid fenders and everything underneath for 225.00
Rubicon_Fan
Adventurer
Finally had some time to work on the trailer:
-Re Done the wiring (used military stock wires - bullet proof)
-Extended the hitch receiver by 18" (not in the pic) to allow the tail gate to swing open while attached to the Trailer
-Installed matching wheels and a set of 35" tires
-AND took it out and test everything! Works brilliant!
Still need to do: Widen the fenders and I desperately need 5.13 gears in my jeep.
And the "dish" I'm Known for! BBQ salmon!
PS was too excited to try out my set up and forgot my camera. Apologize for low res iPhone pics.
-Re Done the wiring (used military stock wires - bullet proof)
-Extended the hitch receiver by 18" (not in the pic) to allow the tail gate to swing open while attached to the Trailer
-Installed matching wheels and a set of 35" tires
-AND took it out and test everything! Works brilliant!
Still need to do: Widen the fenders and I desperately need 5.13 gears in my jeep.
And the "dish" I'm Known for! BBQ salmon!
PS was too excited to try out my set up and forgot my camera. Apologize for low res iPhone pics.
Rubicon_Fan
Adventurer
Thanks for great idea on the lid!!
Sent from my iPhone using Tapatalk
Rubicon_Fan
Adventurer
It wasn't me who had a spare lid.. Must have been another member on the forum.
Sent from my iPhone using Tapatalk
Last edited: