I have a few issues with the rack.
1. It's whistling. I have a James Baroud RTT on my rack and starting from about 25mph and up it whistles constantly. Perhaps I need to play with the positioning of the RTT since there's room to move the tent fore and aft.
2. The bracket that rest on the top of my roof is bent and doesn't sit flush with the rubber bushings to create a water tight seal.
3. The directions did not mention that if you have the headliner in your top, you need to remove it. This plus the fact that the bracket the directions say to use as the template to drill the holes in your top was also bent. So I couldn't align the bracket to the curvature of the top. It caused my drill holes to be off by 1 inch. Once I peeled off the headliner, it was obvious that the bracket was bent and never aligned to the curvature of the top. So now my hard top is like swiss cheese.