ARB Awning >> Garvin Wilderness Rack

[Carolyn]

Who has attached an ARB Awning to a Garvin Wilderness Rack? Trying to figure an easy (inexpensive) bracket solution to avoid drilling into my rack -

Thanks!

By the way..... bought the ARB Awning from Kurt at Cruiser Outfitters..... Great experience - highly recommeded :sombrero:

 

[Utah KJ]

When I had the ARB mounted to my Jeep, I just went to Home Depot plumbing dept and bought a pack of those deals that mount pipe to walls. I used 3 of them and the awning held on through 75mph freeway runs, all manor of ExPo activities, and that windstorm I told you about in that other thread. I recommend picking up some washers and some longer bolts while you're there. You'll definitely need the washers and you'll probably need the longer bolts.

 

[UNI]

Carolyn,

I sent you an email

Alan

 

[Carolyn]

Thank you Utah KJ

Alan, it did not come through?

 

[UNI]

I just PM you a pic...Give me a shout... Hope this helps

Alan

 

[endo]

not the coolest solution

But this works
http://www.google.com/products/cata...9X2OILu0gGm4sXICA&ved=0CJABEPMCMAQ#ps-sellers
3 of these and your off and running. You may need to drill the holes out to make the fit correct. Get the one for the diameter of tubing on the Rack.
I ran mine like that for quite some time until I came up with another solution.

 

[Carolyn]

Thanks endo!

Alan. Your solution looks like this is going to work for me. I'll have 3 brackets made, and just screw to them. I'll post photos after I get 'er done :sombrero: Muchas Gracias...

Thanks all for your help and suggestions :ylsmoke:

 

[UNI]

Carolyn,

You are very welcome, glad I could help. If there is anything else, just shout!

Alan [UNI]