ARB Diff Breather kit

[BIGdaddy]

http://store.arbusa.com/ARB-Differential-Breather-Kit-170112-P22783.aspx

Anyone have experience with this product? It's new to me. Seems like a great idea. You can fit up to four "assemblies" onto it.

So you could do:

Front diff
Rear diff
Transmission
Tcase

...All leading to one breather outlet valve.

Cool!

 

[cruiseroutfit]

We have installed them on a variety of Toyota applications. The kit is nice and with most modern Toyota's the breather fittings are in place already so it's simply a matter of running new line. Even on older applications with the 'cap' style vents, you simply pop off the cap and with a little heat on the ARB line, push it over the fitting and clamp it in place. Perfect!

 

[Smithy]

I made mine out of ⅜" rubber fuel line and some plastic vacuum tees. Both diffs, trans and tcase vents are routed up to the engine compartment, cost next to nothing to do.

 

[BIGdaddy]

I made mine out of ⅜" rubber fuel line and some plastic vacuum tees. Both diffs, trans and tcase vents are routed up to the engine compartment, cost next to nothing to do.

Yup, people have been doing that for years. Just a specific question about a specific product. Thanks, tho!