badm0t0rfinger
Raptor Apologist.
Thats awful!
badm0t0rfinger's 2014 Raptor build
- Thread starter badm0t0rfinger
- Start date
badm0t0rfinger
Raptor Apologist.
Cleaned out the truck, aired out the tent. I need to remember to air it out more often as the humidity out here can really take a toll compared to SoCal. Had a bit of a funky musk, so I cleaned the hard parts with diluted bleach and the fabric with diluted vinegar.
Kingsize24
Well-known member
How do you like that Leitner Designs rack? Think with the cross bars full forward you could still put a motorcycle or a small 4 wheeler in it?
Todd780
OverCamper
I've wondered that as well. Curious if there's any rack setup that would somehow allow a motorcycle in the bed and then two kayaks above it?
badm0t0rfinger
Raptor Apologist.
I ended up taking some desiccant from work that was headed to the dumpster; it was outside its "usable lifespan" as far as aerospace is concerned, but just fine after a few hours in the oven at 250F for me. I hope it helps quell the condensation issue going forward.
The rear bars have knobs on them so its pretty easy to move forward; you could absolutely put a bike in there. Depending on the width of the bed and how wide the atv is, you could probably do it. The storage boxes aren't huge, but they do extend inwards into the bed area a bit, so that may cause fitment issues.
At the same time? Probably not. Depends how you load the bike, the height of the handlebars... Like could you fit a smaller dirt bike and some kayaks at the same time? definitely maybe.
I like it a fair bit. Its good, modular and pretty robust. Mine is getting a bit old, have thought about taking it off to either replace it with their newer model or just refresh/repaint and replace some of the hardware. The modularity has been a huge upside and it ever plays nice with a lot of other rack or general overland gear and accessories.
The rear bars have knobs on them so its pretty easy to move forward; you could absolutely put a bike in there. Depending on the width of the bed and how wide the atv is, you could probably do it. The storage boxes aren't huge, but they do extend inwards into the bed area a bit, so that may cause fitment issues.
At the same time? Probably not. Depends how you load the bike, the height of the handlebars... Like could you fit a smaller dirt bike and some kayaks at the same time? definitely maybe.
Kingsize24
Well-known member
Thank you!!! I'm going to start looking for a used one for the beater I think.
badm0t0rfinger
Raptor Apologist.
Hey I saw a truck today that had the height extenders [for the crossbars] on it and with that I think that could definitely help with clearances.
Kingsize24
Well-known member
I'm looking at that currently. I'm also going to look at one soon that is for sale for 1k, it's the newest version so I'm not sure what all was changed, but it's what is avaliable. If I can fit a motorcycle or a 4wheeler in back and still get a kayak on I'll be stoked.
badm0t0rfinger
Raptor Apologist.
It's fine. I enjoy jet ski content.
That's an awesome set up. Glad it's cleaned up. Excited to wrench on my RXT in 2 weeks.
ITTOG
Well-known member
I can ride two but it is a bit hard to do it at the same time.
Sent from my Pixel 7 Pro using Tapatalk
badm0t0rfinger
Raptor Apologist.
Did a 70 mile ride on memorial day weekend on the stand up. I count it as "leg day" for the rest of the month.
Kingsize24
Well-known member
Dude I bet so! Could you walk the next day? 😂
