Bailey's 2018 Four Wheel Camper (Raven) - Build & Photos
- Thread starter BJ'sFJ
- Start date
ConcordCarlos
Member
I looked at both your threads, do you have a write up on your cellular boost project?
BJ'sFJ
BJ's Tundra :)
I don't have a write up on the we-boost install. Off Grid Engineering did the install for me.
ConcordCarlos
Member
Ok. Thought I’d ask. Was it worthwhile ?
BJ'sFJ
BJ's Tundra :)
100% worth the money in my opinion. I've had LTE coverage in 90% of the photos I post.
It doesn't create service out of nowhere but will easily boost 1-2 existing bars to 2-3+. I have been able to stay connected while living on the road.
BJ'sFJ
BJ's Tundra :)
Working on a CrewMax Rear Seat Delete with Goose Gear
The goal is to add more storage to the rear so I can store items like tools, jumper cables, recovery gear, skottle, etc.
You can delete 60%, 40%, or the entire 100%. I'm going to delete the entire back seat and go with something special for my application. I'll post more photos as we make progress on this
www.goose-gear.com
The goal is to add more storage to the rear so I can store items like tools, jumper cables, recovery gear, skottle, etc.
You can delete 60%, 40%, or the entire 100%. I'm going to delete the entire back seat and go with something special for my application. I'll post more photos as we make progress on this
www.goose-gear.com
BJ'sFJ
BJ's Tundra :)
BJ'sFJ
BJ's Tundra :)
BJ'sFJ
BJ's Tundra :)
After 6 months of running a Four Wheel Camper on my Toyota Tundra, it's time for more organized storage. I ran a Goose Gear system in my FJ Cruiser and was very happy. I decided to reach out to them to see if they had an interest in developing a system for the Toyota Tundra CrewMax (07-13).
While chatting with Goose Gear, Brian determined it would be best to offer 3 options for customers. A 40% delete, 60% delete, or the option to delete all 100%. This allows you to run a drawer on the passenger side, driver side, or a drawer on both sides.
He took some measurements and did his magic on the computer. It was impressive to see the computer design come to life on the CNC machine:
A few pics of the prototypes:
40% Delete
60% Delete
100% Delete
Production models will be coated in bullet liner and the access cubbies will be fully assembled with latches.
I plan to delete the entire back seat and run 2-22" wide drawers (one on each side). This will allow me to store my jumper cables, tools, bike gear, and more. The dog will have a bed on top of the drawer so he can be comfortable on our adventures.
I'll post more pictures as progress is made on the seat delete and drawers. At this time, I don't have any clue when GG will release production models. They are just starting this project
While chatting with Goose Gear, Brian determined it would be best to offer 3 options for customers. A 40% delete, 60% delete, or the option to delete all 100%. This allows you to run a drawer on the passenger side, driver side, or a drawer on both sides.
He took some measurements and did his magic on the computer. It was impressive to see the computer design come to life on the CNC machine:
A few pics of the prototypes:
40% Delete
60% Delete
100% Delete
Production models will be coated in bullet liner and the access cubbies will be fully assembled with latches.
I plan to delete the entire back seat and run 2-22" wide drawers (one on each side). This will allow me to store my jumper cables, tools, bike gear, and more. The dog will have a bed on top of the drawer so he can be comfortable on our adventures.
I'll post more pictures as progress is made on the seat delete and drawers. At this time, I don't have any clue when GG will release production models. They are just starting this project
Last edited:
BJ'sFJ
BJ's Tundra :)
Currently in Oregon
Here are a few pics of my NWOR (North West Overland Rally) trip so far with Chris M. from TOTAL CHAOS Fabrication.
We camped on National Forest Land near Mammoth Lakes Sunday, Plumas National Forest last night and now we're in Oregon.
More pictures to come...
Here are a few pics of my NWOR (North West Overland Rally) trip so far with Chris M. from TOTAL CHAOS Fabrication.
We camped on National Forest Land near Mammoth Lakes Sunday, Plumas National Forest last night and now we're in Oregon.
More pictures to come...
BJ'sFJ
BJ's Tundra :)
Currently in Oregon
Here are a few pics of my NWOR (North West Overland Rally) trip so far with Chris M. from TOTAL CHAOS Fabrication.
We camped on National Forest Land near Mammoth Lakes Sunday, Plumas National Forest last night and now we're in Oregon.
More pictures to come...
More pics...
BJ'sFJ
BJ's Tundra :)
A few days ago I took Imogene Pass up from Telluride to Tomboy. The pass was closed at Tomboy. On Friday morning I took Imogene Pass from Ouray just past Upper Camp Bird Mine (~11,500ft). Had lunch and turned back down. Looks like it'll be a few more days before the entire pass is open.
It was a little rough but I'm happy with how the Tundra and Four Wheel Camper handled everything. Check out some pics below:
It was a little rough but I'm happy with how the Tundra and Four Wheel Camper handled everything. Check out some pics below:
greenheadsmt
New member
Very cool! What size alu-box is that?