mat roberts
New member
hi guys,
just about completed my 1990 90, interior to finish
just about completed my 1990 90, interior to finish
BALOO my not so expedition 90!
- Thread starter mat roberts
- Start date
Fivespddisco
Supporting Sponsor
were did you get the headlight surounds?
mat roberts
New member
hi guys,
we manufactured the light surrounds ourselves, starting by removing the light boxes in the wings and making our own. thinking we could never afford a 90 we started with something that needed a little! bit of work. we repaired and blasted the chassis, media blasted and repaired the bulkhead and inner wings then galvanised.
we had to build a vehicle that looked different to anything before, basically to show our metalwork to all. wheel arches, rack, bumper, grille, rear ladder, side windows and steps are all ours. thanks for your interest, we are very proud of our little truck.
we manufactured the light surrounds ourselves, starting by removing the light boxes in the wings and making our own. thinking we could never afford a 90 we started with something that needed a little! bit of work. we repaired and blasted the chassis, media blasted and repaired the bulkhead and inner wings then galvanised.
we had to build a vehicle that looked different to anything before, basically to show our metalwork to all. wheel arches, rack, bumper, grille, rear ladder, side windows and steps are all ours. thanks for your interest, we are very proud of our little truck.
mat roberts
New member
slight alteration to roofline, wanted black to flow round, homemade rear door with lift off top to match side doors.
mat roberts
New member
hi,
we used 265 75 16 hankooks, we dropped a 200tdi out of a disco in after having head skimmed, crack tested, valves re seated, timing belt and water pump changed, and turbo rebuilt.
we used 265 75 16 hankooks, we dropped a 200tdi out of a disco in after having head skimmed, crack tested, valves re seated, timing belt and water pump changed, and turbo rebuilt.
DividingCreek
Explorer
will you be offering the two part rear doors for sale ? Could you include a shot as to how you flanged it on the inside. Great idea.
Last edited:
mat roberts
New member
hi,
land rover would ********** my bottom if tried to sell these, maybe i could manufacture standard shape, without logo.
land rover would ********** my bottom if tried to sell these, maybe i could manufacture standard shape, without logo.
ColinTheCop
Adventurer
Any significance in the G-WAC number plate...?
I know they are for Discos, not sure if's the same for Defenders.
I know they are for Discos, not sure if's the same for Defenders.
mat roberts
New member
hi,
dont think so, think its just a sollihul registration of 1990. looks cool though, ps. managed to get a few midge signatures in tarbert last weekend, big bites for such a small thing, should have learned my lesson in invercoe 2 years ago!!!
dont think so, think its just a sollihul registration of 1990. looks cool though, ps. managed to get a few midge signatures in tarbert last weekend, big bites for such a small thing, should have learned my lesson in invercoe 2 years ago!!!
ColinTheCop
Adventurer
Yeah, nasty little buggers. The only bad thing about living up here.
I know the G-WAC Discos were all press vehicles and are considered quite collectable, just wondered if your Defender was originally owned by Land Rover...?
I know the G-WAC Discos were all press vehicles and are considered quite collectable, just wondered if your Defender was originally owned by Land Rover...?
Similar threads
