Kiddmen57
Supporting Sponsor
I've already placed an order for more. Will let you know when they are ready. I figure I might was well keep some in "stock" now.
Baofeng UV5R "Builder Brackets"
- Thread starter Kiddmen57
- Start date
I've already placed an order for more. Will let you know when they are ready. I figure I might was well keep some in "stock" now.
paranoid56
Adventurer
in for one when more show up.
BulletHead
Adventurer
In for 1, if possible, thx.
Kiddmen57
Supporting Sponsor
I dropped 4 brackets off with the powder coat place. I will evaluate the finish, and quality, as well as check fit just in case. Will report back here. Only issue, is to get the cost down will have to do the entire batch in PC. It will add cost to the bracket, still to be determined. I will hopefully know more later this week or early next week.
Fimbulvetr
New member
I'm in for 2 with ram mount nut welded on whenever you make another batch.
Kiddmen57
Supporting Sponsor
For those asking about the UV-82, here's some info. Looks like a notch needs to be cut on one of the wings to clear the side buttons.
thought id throw up some shots of the UV-82 fitment.
Bracket dimensions are perfect except a small notch needs to be made to avoid bracket keying down the flashlight button. Easy. fits tight and does not rattle at all. still need to weld a nut on it so i can use a ram mt.
before:
after:
Kiddmen57
Supporting Sponsor
I got the samples back from the powder coater yesterday and while nice, there are a couple quality issues I'd have to address. All in all I don't think it's worth the extra cost when most will have a can of spray paint at their house, and may need to modify the bracket as needed.
Samples
Samples
paranoid56
Adventurer
woot, got mine, thanks for the quick shipping.
