24HOURSOFNEVADA said:
Did I miss why you need a new antennae? How's the search going for one? I was hoping you would find one that doesn't have a huge T-connector so close to the actual puck. I think mine looks like hideous with the junction so close.
Didn't see this until just now. IMO it would be much better if the puck had the connector built into it rather than dangling in space on a leash.
As best as I can tell the overgrown branches in Pleasant Cyn in the Panamints took their toll on the antenna. (Maybe I shouldn't have forced a full size Sub thru a 4rnnr sized hole? Nah, that couldn't be it.)
The antenna itself was mounted about as low profile as possible without cutting a huge hole in the roof of the Suburban to feed the wire though. Since Lowrance uses what appears to be a proprietary connector (that they won't sell me) a small hole wasn't possible so the wire was forced to trail off the side of the roof through a door opening. I did place the antenna as close to the opening as possible, but.....
I think with that proprietary connector and the 12VDC power supplied to it that we're stuck using their product. Based on previous experience that isn't an accident. Gilsson was surprised at the 12VDC, all of their products use 5VDC.
robert j. yates said:
While Kartek will sell you a Lowrance, they are not all that interested in supporting it which is how I ended up at PCI...Kartek told me to call them.
I did call them and the guy that I talked to was willing to order it for me. I need it to be in place and functioning by the 20th for Vegas to Reno and he did not sound like they could do that. All of my wanking cost me too much time. It is on the way, should be here tonight.
I can't tell for sure, but it looked like a new antenna may come with an extension lead. If it does I will be dissecting the connector to see how and if it comes apart.