wanderer-rrorc
Explorer
Edgestar Manual
DC input power
When attempting to plug your portable freezer into a
standard 12 V socket, the unit will not work if socket has a
voltage of less than 10.4 V. The unit will restart when the
voltage is 11.8V or greater.
When attempting to plug unit into a standard 24 V socket,
the unit will not work if the socket has a voltage of less than
22.5 V. The unit will restart when the voltage is 24.2 V or
greater.
Understanding the Temperature control setting
Your portable freezer uses a digital control system for adjusting the
thermostat.
1. SET: Set button – press this to set the desired temperature
2. Button for increasing the temperature setting +
3. Button for decreasing the temperature setting –
4. FF: Fast Freeze button – this function quickly drops the
temperature
5. “Run” indicator: this will be red when the Fast Freeze
function is on and green when the unit is running normally
6. “Low” indicator: when the power is too low, this yellow
indicator will flash
7. LED display: shows the temperature in Fahrenheit (°F)
YEP!!!
My 62 edgestar has a progamable cuttoff...and wont run untill supply voltage is high enough (I discovered that my power cable wasnt big enough and the drop across 15ft of wire would turn the fridge off)