Body type and finding an oil leak

[devo 1]

It is the EBV control. I have deleted it on my F350 and E350. On the van I plugged the control back in to the wiring harness and zip tied it out of the way. If not, it will leave a soft code in the computer. (no check engine light) Then I gutted the EBV valve out. While I was in that part, I used a die grinder and smoothed out the inside of the valve housing. I used this non ebv turbo pedestal: http://www.strictlydiesel.com/p-2660-non-ebv-turbo-pedestal-late-99.aspx

My oil leak was the non serviceable hpop plug. This guy sells one to replace it: http://www.dieselorings.com/serviceable-replacement-hpop-plug.html

 

[devo 1]

I fixed the hpop leaks from the back. Took the up pipes and turbo off to get to it:

 

[devo 1]

This is the only pic I could find of the gutted ebv. The ebv pieces are laying on the floor behind the up pipes.

 

[devo 1]

The 95 turbo pedestal is different: http://www.strictlydiesel.com/p-3358-non-ebv-turbo-pedestal-94-97.aspx

 

[gtbensley]

Awesome thanks!!! It seems to be the sensor itself that's leaking....Not that it matters, the ebpv still needs to come out it looks like.

 

[gtbensley]

I updated post one if anyone has some insight?