bugeye1257
Observer
Just posted!
Bugeye's GX460 Build
- Thread starter bugeye1257
- Start date
Just posted!
bugeye1257
Observer
Tested out clearances, need to do more trimming up front with a BMC.
bugeye1257
Observer
Nice rig! I really like those rims.
Pics can be funny, those two shots showing all the suspension flex appear to be on relatively flat ground. It almost looks as though your suspension is completely broken....
Thanks, 4runner trail wheels. New wheels are going to be ordered in the next month or so.
Ground dipped pretty low on the passenger front, looks deceiving.
bugeye1257
Observer
Did some more trimming this past weekend, specifically the BMC.
bugeye1257
Observer
New wheels have been added thanks to Fifteen52. More to come soon!
Turbomac HD 17x8.5 0 Offset
Turbomac HD 17x8.5 0 Offset
Tex68w
Beach Bum
It's no different than the Tacoma's, 4Runners, and Land Cruisers, just gotta do a little trimming. And yes there are a few bumpers out there for the 2010-2013 GX460.
I have a 460 and I am curious to find out what this is that you are doing to yours:
SwayBar Relocation Brackets
Are you planning to keep KDSS?
Also what are the specs of the Turbomacs? Did you really need to do the BMC or was that precautionary? I am currently running FJ wheels and will be switching over to OEM GX470 wheels that have an offset of 15mm and I clear the BM with 265/70/17's.
SwayBar Relocation Brackets
Are you planning to keep KDSS?
Also what are the specs of the Turbomacs? Did you really need to do the BMC or was that precautionary? I am currently running FJ wheels and will be switching over to OEM GX470 wheels that have an offset of 15mm and I clear the BM with 265/70/17's.
bugeye1257
Observer
There are a few, Metaltech, C4, Ironman. Personally I like the C4 out of all of them, slim and clean lines. It doesnt go all the way up to the headlights but you have to cut your bumper in half.
No swaybar relocation brackets as you have KDSS, it wont work. I do plan on keeping KDSS, no real reason to get rid of it now unless I go long travel,
The Turbomac HD's are 17x8.5 0 Offset. I had trail wheels with a 1.25 spacer before this setup. I needed a BMC for that setup. If you are only running 265s then you shouldnt have to worry about the BMC.
bugeye1257
Observer
Nice! I have the same wheels on mine
Sent from my iPhone using Tapatalk
So your the one that bought this rig
I follow the old owner on instagram. I need to bump up my tire size to match yours!jgilbreath
Observer
Bull0080,
Can you give your thoughts on the prinsu rack? How was installation? I'm trying to convince my wife that the prinsu is a better option than factory cross bars.
Can you give your thoughts on the prinsu rack? How was installation? I'm trying to convince my wife that the prinsu is a better option than factory cross bars.
bugeye1257
Observer
Wow, haven't updated this in a bit. Recently did some maintenance to the GX.
The EBC GreenStuff pads made a big difference in stopping, also combined with some stoptech/centric blank rotors.
Next up was a Green Filter, filter to replace the OEM one. Made in the USA and quality built.
Next up was a Green Filter, filter to replace the OEM one. Made in the USA and quality built.
Similar threads
