Building Parnelli's JK

blueeyeddevil

Observer
Getting the JK on the rack. Finally!!!
JK On The Lift small.jpg

I'm fastening up the exhaust
Josh Mounting JK Exhaust small.jpg

The Banks "Monster" muffler. It is very small compared to the stock muffler.
Banks Monster Muffler small.jpg

The factory intake system
Stock JK Intake System small.jpg

The Banks Ram-Air system
Banks Ram-Air JK Intake small.jpg

A side view of the ram air system
Banks Ram-Air Intake Side View small.jpg

Co-worker Noah, working on the exhaust
Noah Working On Banks JK Exhaust small.jpg

Yours truly, doing a little roll cage work. I felt funny as a fabricator posting a bunch of plug and play pictures, without any pictures of fabrication work. JK fabrication will be going full-force shortly.:smiley_drive: The new lift kit will be delivered from Cali this morning and I'm hoping to have some better pics of a step by step process. All of these pics were taken with the trusty cell phone.
Polaris Ranger Close-up w me small.jpg
 

blueeyeddevil

Observer
Things have been a little hectic to say the least. Here are some pics of the OBA mounting bracket. The pattern is pictured. They are now at the water-jetter's getting cut out. There will be 2 options 10ga cold rolled steel or Aluminum.
I will be installing an aluminum plate on Parnelli's JK.

OBA JK Bracket 1.jpg

OBA JK Bracket 2.jpg

OBA JK Bracket 3.jpg

OBA JK Bracket down into Engine Compartment..jpg

OBA JK Bracket down into Engine Compartment.. 2.jpg

OBA JK Bracket  Ground up into Engine Compartment.jpg
 
Last edited:

24HOURSOFNEVADA

Expedition Leader
This year sucks...First, Farrah Fawcett dies, now PJ is rocking a four door Jeep. I mean really, no classic Bronco?


Before everybody gets in an uproar over my JK comment, It's not a dig on them. I like them and this one's going to be super cool, but some things just go together.

Cool build nonetheless.
 

Chris85xlt

Adventurer
thats an interesting place to mount the compressor...i like!


hey! where can i find some 33x10.5-17 PJ tires because its not on their website :D
 

blueeyeddevil

Observer
I was wondering where you got the bed storage unit? And do they make them for 2 door JKs?

Randy

I make those bed storage units. I can make them to any size or configuration. They typically are made of 18ga 5052 aluminum. We would be happy to make one for your 2 door JK.
 

blueeyeddevil

Observer
thats an interesting place to mount the compressor...i like!


hey! where can i find some 33x10.5-17 PJ tires because its not on their website :D

That OBA mount is now available. It is constructed out of .250" Aluminum. Weighs about 5 lbs.
Call for a "first run" special expo member price.

I apologize, for the typo. They are 33x12.50x17R tires. Stop by or call the shop and we would gladly get you pointed in the right direction on some Dirt Grip tires.
 

AZUnlimited

Adventurer
Josh,
Looks so AWESOME!!! Can't wait to see it in person. And it solves the dilemma of where to mount the relay. :wings:
 

blueeyeddevil

Observer
Good eye! That didn't take long. It is backwards, I took the photo before we fixed it. I knew that would be a good reason for somebody to post. Your all welcome to stop by and try to pick it apart.:sombrero: At least it will keep the thread at the top of the list!! :victory:
 

Forum statistics

Threads
189,846
Messages
2,921,502
Members
233,030
Latest member
Houie
Top