Carli R2 Rear Coils For My 2021 Power Wagon

[aaaslayer]

Hello,


I have a 2021 Power Wagon with the following suspension:


Thuren Front 1.5" Power Wagon coils
Thuren Overland Front Shocks
Thuren Front Trackbar

Thuren Rear STOCK HEIGHT SOFT RATE Power Wagon coils
Thuren Overland Rear Shocks
Thuren Rear Trackbar
Thuren Rear Extended Sway Bar Links


My question, I added about 450-500 lbs of constant weight to the back with a pop top camper, Rigd tire carrier, and a full size 37". I now have sag, and wanted to correct it.


I read around on a few forums of folks running Carli R2 rear coils on their Power Wagon to make up for that added weight of a topper and tire carrier with full spare. Anyone here do the same? And did you have to swap out your shocks as well to the Carli tuned ones?


Any info or suggestions would be appreciated!

 

[aaaslayer]

You have stock height rear springs and lift/leveling springs on the front.
Go back to stock height springs up front, the last thing you need is a lift which does not level.

Rear springs are from Thuren they are "stock height" as in, I don't get any lift, but they are still 3" longer than OEM. They're just much softer coil rate.


If I go back to stock height springs in the front, I rub bad with 37s. Thanks for the useless comment.

 

[driller]

I cant give opinion on the Carli spring. But I have the same springs on my PW. I run a Habitat shell and was sagging a little. Thuren Has an adjustable spring spacer for the rear. I added that at full space and it helped a lot. Then I added air bags for when i load up heavy for trips. I usually run the bags around 10psi and found the set up works good for me.

2014-2024 Dodge Ram 2500/PW HSK Rear Shim Kit

Discover the Thuren Fabrication HSK (Height Shim Kit) for enhanced rear coil performance in 2500 and Power Wagon trucks! Safely use a small spacer while preserving full compression travel. Elevate your 2014+ Ram 2500 and Power Wagon today! #ThurenFabrication #HeightShimKit #EnhancedPerformance

www.thurenfabrication.com

 

[PNW_PW]

I'm running the R2s with a full Carli setup on my 21 PW with a Super Pacific, Rig'd carrier & 37s on it. With the back loaded for a weekend it still sits real nice without noticeable sag. I think they felt overly stiff while I was waiting for my X1 but they feel great with everything on it.

 

[aaaslayer]

I cant give opinion on the Carli spring. But I have the same springs on my PW. I run a Habitat shell and was sagging a little. Thuren Has an adjustable spring spacer for the rear. I added that at full space and it helped a lot. Then I added air bags for when i load up heavy for trips. I usually run the bags around 10psi and found the set up works good for me.

2014-2024 Dodge Ram 2500/PW HSK Rear Shim Kit

Discover the Thuren Fabrication HSK (Height Shim Kit) for enhanced rear coil performance in 2500 and Power Wagon trucks! Safely use a small spacer while preserving full compression travel. Elevate your 2014+ Ram 2500 and Power Wagon today! #ThurenFabrication #HeightShimKit #EnhancedPerformance

www.thurenfabrication.com

I know about the spacers but was hesitant to run them. With the R2 coils I'm gaining the needed height and also payload. But, would you be able to share a side shot of your truck? If not too much trouble.

Thanks

 

[RAM5500 CAMPERTHING]

@aaaslayer and @PNW_PW sorry, i have no info on the springs, but...

Any chance you guys could help me out with some pics measurements of your front sway bar whenever ya get a chance? Feel free to PM me.

Thanks

 

[bikelanta]

I'm running the R2s with a full Carli setup on my 21 PW with a Super Pacific, Rig'd carrier & 37s on it. With the back loaded for a weekend it still sits real nice without noticeable sag. I think they felt overly stiff while I was waiting for my X1 but they feel great with everything on it.

Let's see this beast!

 

[PNW_PW]

Here are a couple from install day at Super Pacific and later that day/night on the coast.

 

[Hegear]

@aaaslayer and @PNW_PW sorry, i have no info on the springs, but...

Any chance you guys could help me out with some pics measurements of your front sway bar whenever ya get a chance? Feel free to PM me.

Thanks

Did you get these? If not I could provide. Thx

 

[Hegear]

Here are a couple from install day at Super Pacific and later that day/night on the coast. View attachment 763787View attachment 763788

Looks great! Would you say the d2 is a lot firmer than stock?

 

[PNW_PW]

Looks great! Would you say the d2 is a lot firmer than stock?

It's been a while since I drove it stock but I think it felt a good bit firmer with the R2s when it was completely empty. loaded it feels just right IMO.

 

[bikelanta]

Here are a couple from install day at Super Pacific and later that day/night on the coast. View attachment 763787View attachment 763788

Awesome! I have a white one of the same vintage. Need to increase the tire size at some point.