Craigslist been bery, bery, good to me!!
- Thread starter Nonprophet
- Start date
Willman
Active member
Another thing with winching off the bumper is doing the end cap mod!
Here is where i got my idea of the end cap mod!
http://www.wattora.com/index.php?page_id=13
The endcap is very important if you plan on winching off these ARBs! I have seen a ARB bumper without the mod and it looked like the bumper had moved 1/2" at times while winching.
I took a piece of 3/16" angle 3x4 and custom fitted to the frame. I drilled 1/2" holes for the bolt and tic it into place.
I drilled holes into the frame so i could weld rosebuds to give the endcap more muscle!
Here is the finished product.
Here is where i got my idea of the end cap mod!
http://www.wattora.com/index.php?page_id=13
The endcap is very important if you plan on winching off these ARBs! I have seen a ARB bumper without the mod and it looked like the bumper had moved 1/2" at times while winching.
I took a piece of 3/16" angle 3x4 and custom fitted to the frame. I drilled 1/2" holes for the bolt and tic it into place.
I drilled holes into the frame so i could weld rosebuds to give the endcap more muscle!
Here is the finished product.
toyrunner95
Explorer
well the 8274 was the first winch produced by warn and i believe it was the first eletric self recovery winch made available to the consumer instead of commercially. there alot of winches that arent made anymore like the x8000i, but i believe that the hs9500i became or was modified to be the hs9500TI and the m9000 became the m9000xp, the winchs evolve over time and warn will still cover the warrenty.