demonslaer
Observer
anyone ever built there owen awning? if so what did you use for a frame thinking about trying to building one. do we have a DIY page ? lot of pepole would benefit from it that is on a buget
diy awning
- Thread starter demonslaer
- Start date
mervifwdc
Adventurer
I'm thinking of it too. I've checked with a local place to me (Dublin, Ireland) which makes up covers for trucks (curtain siders, 40-foot artics etc), and for less than €100 he will do pretty much whatever I want up to 9 feet by 12 feet, ties, ropes, re-inforcement at edges etc. I'm now planning to visit a good tent shop to see if I can buy adjustable height poles. I'll check back in when I'm done.
Merv.
Merv.
PaulJensen
Custom Builder
Check out my simple solution...
http://www.expeditionportal.com/forum/threads/62159-2006-Sprinter-Conversion-For-Work-or-Play
http://www.expeditionportal.com/forum/threads/62159-2006-Sprinter-Conversion-For-Work-or-Play
PaulJensen
Custom Builder
Check out my simple solution...
http://www.expeditionportal.com/forum/threads/62159-2006-Sprinter-Conversion-For-Work-or-Play
http://www.expeditionportal.com/forum/threads/62159-2006-Sprinter-Conversion-For-Work-or-Play
I used 3/4" and 1" EMT (electrical conduit) for a canopy frame that I built for my race trailer. The tubing is 10' long but with a tubing bender and my welder I was able to make a very strong framework. Sorry I don't have any photos of it.
The same could be done using aluminum tubing and fittings that are sold at very good marine/boating stores.
The same could be done using aluminum tubing and fittings that are sold at very good marine/boating stores.
D
Deleted member 9101
Guest
I got a coleman sun shade off Amazon and tie one end to my camper and use the poles for the rest.
http://www.amazon.com/Coleman-20000...8WA2/ref=sr_1_9?ie=UTF8&qid=1313546760&sr=8-9
http://www.amazon.com/Coleman-20000...8WA2/ref=sr_1_9?ie=UTF8&qid=1313546760&sr=8-9
I just finished my simple awning and posted write-up here
http://www.expeditionportal.com/forum/threads/65647-How-to-build-a-quality-awning-for-less-than-100
http://www.expeditionportal.com/forum/threads/65647-How-to-build-a-quality-awning-for-less-than-100
I am going to use triple layer acrylic (like greenhouse panel) and surround it with aluminum channel, and have it slide under my roof rack. Fast, easy, and simple Except to build it. So, it will be 8' long 7' wide and likely be supported by swing out mini trusses (no legs or angled supports)
Jronwood
Jronwood
Similar threads
