VerMonsterRV
Gotta Be Nuts
Hey all, I am considering trying to DIY a version of a GuzzleH2O (to pull water from a stream). It looks like a really nice setup but at $950 is a bit out of our budget. Unfortunately the compact LED UV sterilizer they use is not available to the general public (I contacted the company and they pointed me to GuzzleH2O). Since this would be a one off I am sure it will not be as slick but should be a bit less expensive. So here is what I have come up with so far.
16Ah LifePO4 battery
Pentek 158111 5" filter housing (would also need the filters, likely a 5 micron as I would refilter onboard)
16W UV Sterilizer up to 3 GPM (a bit bigger than the Guzzle one but the best I could find)
12V Ballast for the above sterilizer
12V battery gauge
On/Off Switch
LifePO4 Battery Charger
Inlet Strainer
Waterproof case (various sizes, will not decide until all components arrive)
Oh, and a 12V DC pump
Now this project would be assembled outside a Home Depot (we are in the truck full time) for the various hoses and connectors needed if I did not already have them. Total cost should be around $400 (but I already own the pump so $300). Any thoughts?
https://www.amazon.com/gp/product/B07H95R87N/ref=ox_sc_act_title_2?smid=A1FTOQJEANUSOR&psc=1
16Ah LifePO4 battery
Pentek 158111 5" filter housing (would also need the filters, likely a 5 micron as I would refilter onboard)
16W UV Sterilizer up to 3 GPM (a bit bigger than the Guzzle one but the best I could find)
12V Ballast for the above sterilizer
12V battery gauge
On/Off Switch
LifePO4 Battery Charger
Inlet Strainer
Waterproof case (various sizes, will not decide until all components arrive)
Oh, and a 12V DC pump
Now this project would be assembled outside a Home Depot (we are in the truck full time) for the various hoses and connectors needed if I did not already have them. Total cost should be around $400 (but I already own the pump so $300). Any thoughts?
https://www.amazon.com/gp/product/B07H95R87N/ref=ox_sc_act_title_2?smid=A1FTOQJEANUSOR&psc=1