Located in Huntington Beach. Local pickup welcome. Paypal accepted.
After moving the fridge to the bed of the truck, my wife and I both agree that we liked it better when it was in the cab. Easier access to food and hydration while on the move. Anyway, it was in the back of the truck about 4 months. The feet are included, just havent got them off the fridge yet. This is for the 35/45. SOLD!
Next, I bought this sweet ARB steel braid air line to run from my compressor in the bed of the truck to the air tank. I didn't realize that the fittings were not gonna work with 1/4 npt. After a couple trips to the hardware store to look for an adapter fitting, I gave up and just went with a different air line. It is 12' long. I did take the time to mount it under the truck so it is a little scuffed up. The 4 fittings are as follows:
1. a custom made BSP fitting w/ a bonded washer that threads into the ARB solenoid
2. a standart NPT fitting...this is for the Co2, your compressor, caddy compressor, etc crowd who are making their own air supply system
3. a small bore fitting for the delivery end (axles smaller than a D60, w/ small diam. copper line at bulkhead)
4. a big bore fitting for the larger copper tube (D60 + axles)
You can read more about them in this thread
$50 OBO shipped
Free to whomever may want it: A neighbor had quite a few of these surplus wooden gun cases. He gave one to me before he moved but I don't really have a need for it/have room for it. It's pretty darn heavy. Rough measurements are 4' long x 2' wide x 1' tall. Good condition. If you have a need/want for it, come take it.
After moving the fridge to the bed of the truck, my wife and I both agree that we liked it better when it was in the cab. Easier access to food and hydration while on the move. Anyway, it was in the back of the truck about 4 months. The feet are included, just havent got them off the fridge yet. This is for the 35/45. SOLD!
Next, I bought this sweet ARB steel braid air line to run from my compressor in the bed of the truck to the air tank. I didn't realize that the fittings were not gonna work with 1/4 npt. After a couple trips to the hardware store to look for an adapter fitting, I gave up and just went with a different air line. It is 12' long. I did take the time to mount it under the truck so it is a little scuffed up. The 4 fittings are as follows:
1. a custom made BSP fitting w/ a bonded washer that threads into the ARB solenoid
2. a standart NPT fitting...this is for the Co2, your compressor, caddy compressor, etc crowd who are making their own air supply system
3. a small bore fitting for the delivery end (axles smaller than a D60, w/ small diam. copper line at bulkhead)
4. a big bore fitting for the larger copper tube (D60 + axles)
You can read more about them in this thread
$50 OBO shipped
Free to whomever may want it: A neighbor had quite a few of these surplus wooden gun cases. He gave one to me before he moved but I don't really have a need for it/have room for it. It's pretty darn heavy. Rough measurements are 4' long x 2' wide x 1' tall. Good condition. If you have a need/want for it, come take it.
Last edited:
. Air line is still available.