F150 Snorkel for 4.6 Liter V8

[WVF150]

I have searched all over the internet for one. Does anybody make one that will work on my f150? I have a 2005 F150 4.6 V8 and cannot find any snorkels for my truck.

What do you suggest? Thanks in advance.

 

[Dirty_Jeeper]

I did a quick search and came up with the 250 and 350 only. You may need to find a close match and adapt it. You could build your own, I did. There is a lot of do it yourself info online. Here's my build. http://s892.photobucket.com/albums/ac124/Dirty_Jeeper/The Jeeps/XJ Snorkel DIY/

 

[brianjwilson]

Your factory air intake is nearly four feet above the ground, and fairly well protected from splashing as it pulls air from inside the fender, protected from the splash guards in the wheel well.

I would suggest leaving it as is. If you get that truck in deep enough water to drown the intake, you've already caused a lot of problems with the transmission and axles if you haven't extended the breather tubes.

 

[WVF150]

Yeah, I know a deal about snorkels, had them on my atv and everything snorkeled, vents, overflows etc.. could run it underwater for hours at a time and get no water in it.
Learned the hard way though.