Should be in a freeze plug on the block:
https://external-preview.redd.it/QR...bp&s=fe07a9443b6537c4f5654abee6a5bd2117a07399
On the drivers side. I'd only use it way below 0 degrees. Using it too often in warmer temps will dry out the hoses, and the heaters own oring. And when it nukes, you have to be really careful not to scratch the blocks hole when removing it. I have the plow kit and don't have the heater. I think the 350 and plow kit automatically gets the heater. And some engines have the heater, purely on accident. Not uncommon for engines to be generically the same for a while at the factory.
I might add an glue on oil pan heater. They do next to nothing, but that's more than enough in Ohio. But the salt rust getting under that heater pad, might be worse than starting a cold engine. I'll have to make sure the 6.2L pan can be dropped without pulling the engine, and not like our old 7.3L trucks.
0w30 oil is another option in the winter. I use 10w30 in the summer.
LOL, the new power steering pumps are noisier than ever. They make a howling noise as well as the super charger noise. Our GM's will also howl but no supercharger noise. But the LS GM's have a nasty howl that comes from the cam shaft area on the back of the block at 15 below zero, that last's a while. No idea what it is, but it's never hurt anything. Trans pump?