FlipPac Tacoma Frontier Compatibility??
- Thread starter Josh41
- Start date
02rangeredge
Adventurer
I fthink all you need to know are the dimensions, but if most standard caps aren't you're probably out of luck
rockymtnbushwacker
Observer
61" for Frontier CC SB
63" for Tacoma CC SB
63" for Tacoma CC SB
Josh41
Adventurer
Yes, I'm aware of the size of difference, 
Some caps can accommodate this with a flat bottom (where cap meets bed rail) that is a few inches wide. On one truck it will fit perfectly, on another,it will hang over or show the bed rails a little. Just depends on how it is made. And of course, a good seal needs be made with a rubber gasket/bulb seal. I ask because some caps work, like AT Overland, they designed it to work, and some don't, like LEER, they have an apron that comes down over the outside.
Some caps can accommodate this with a flat bottom (where cap meets bed rail) that is a few inches wide. On one truck it will fit perfectly, on another,it will hang over or show the bed rails a little. Just depends on how it is made. And of course, a good seal needs be made with a rubber gasket/bulb seal. I ask because some caps work, like AT Overland, they designed it to work, and some don't, like LEER, they have an apron that comes down over the outside.
justbecause
perpetually lost
When I was looking for camper shells the major different I noticed taco vs frontier is the horn on the bottom cab side of the fiberglass shells. The frontier has a more pronounced body line there and the taco is more square. I would bet a taco shell will fit a frontier, but not the other way around.