Ford factory E-Series, rear door tilt out windows.

[jronwood]

I have a stash of BOTH gen3 AND gen4 rear tilt out windows here. Been grabbing them as I see them. I have multiples of each. Some tinted, some not. The gen4 (1992-2014) will include the plastic frame, hold down bracket/clip (goes under door frame) and glass. You will need to buy the neoprene tape at any auto parts store. Some of the glass button bolts may have oxidation (not all are perfect) and these were ONLY offered in 1992-1994.

The gen3 will include the stainless top hinge that screws to upper door frame (you must predrill for the little screws) the glass and gasket (gaskets are old but usable, may have overspray from repainting of vehicle)
The bottom hold downs on these have a square threaded steel puck that the hold down screws go into inside the door cavity. Gen3 windows and hinges are stainless trimmed.
$175 ea/$350 pr + ship for gen3
$200ea/$400pr+ ship for gen4
As my inventory of these depletes i will ship best first and price will go down as I get further into the bottom units. I will be specific with known issues as not all are perfect.

I am near Pittsburgh Pa. Thanks 724.331.0723 Reid Crosby

 

[bajahank]

I have a 2014 E-250 and I only need the driver's side window. I don't need the glass to be pretty but it doesn't need to be scape up either. I'll be painting it black. Let me know what you have, I'm in Sarasota, Florida.

 

[jronwood]

Thanks, my cell 724.331.0723

 

[Layzbones]

Do you sell the windows alone? I already have the plastic trim pieces. 2007 e350 with tinted windows.

 

[jronwood]

I believe the glass can be bought as "new". The rare thing to find is the factory mount system. So let me see if I can find you a link. If it fits 1992 it'll fit 2014. All gen4 E Series rear doors are the same. Just have to pick left or right side (unlike gen3, square, the glass is different side to side pass/driver)

Look at this product I found on google.com https://g.co/kgs/giuhZCw