i just received and installed a front runner ladder and had a hell of a time with fitment. After i got it installed, the light housing does not sit flush on the drivers side. Has anyone had a similar issue or have any suggestions? the ladder is sturdy as can be, but the fitmet has me worried about water.
front runner ladder- lr4
- Thread starter Munky
- Start date
Victory_Overland
Explorer
If you don't mind, ask them about the corrosion on the corners of the racks too! I'll be paying them a visit in a few weeks with the expectation they will have four shiney new ones waiting for me to pull in the parking lot! :wings:
NYCRover
Observer
Yeah- will do. Was planning on asking them about the small spots of corrosion on my ladder as well.
Victory_Overland
Explorer
Thanks amigo!
NYCRover
Observer
so- no joy on ladder. seems like the person i talked to didn't know too much about ladder fitment being an issue at all and suggested I try bending the ladder. I think I might email CS with a picture of the fitment issue and see if I get a different response.
As for the rack corners- unlike the rest of the rack, which is aluminum, I was told that the corner caps are cast and they really haven't had problems aside from maybe people who live in an excessively salty environment. He did mention that there might be a new solution coming out over the coming months.
As for the rack corners- unlike the rest of the rack, which is aluminum, I was told that the corner caps are cast and they really haven't had problems aside from maybe people who live in an excessively salty environment. He did mention that there might be a new solution coming out over the coming months.
Victory_Overland
Explorer
Rajah. Thanks for asking. I know AJM in Scotland had the same problem. Mine or flaking miserably which is expected from a steel rack but not aluminum unless its junk pot cast which it appears to be.
I'll ask them and see if I can get a new set on my way to NorCal soon.
Cheers again,
E
joshasbury
New member
I have the same issue and concern. Let us know what you discover -- if anything.
I went to the Portland ABFM today and there were 3 LR3's with FR ladders. all three had the left base of the ladder pulled away from the body work. I did not get a chance to talk with the owners but it confirmed what I thought. The ladder was not designed to be flush with the back door.
Victory_Overland
Explorer
I've emailed a representative I used a while back when I ordered my rack. As soon as I confirm it is still an accurate email address for him, I will address these issues with him directly.
Ladder fitment and rack corner corrosion.
Maybe I'll get lucky and get a response. I will keep you posted.
no-pistons
Adventurer
Post some pics here. I was actually thinking of getting one but would like to see what you guys are talking about
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It is hard to see on my black truck. Hopefully someone with a lighter color might post.
Ladder mounting by jkatka, on Flickr
Ladder mounting by jkatka, on Flickr