adio3x
Observer
Earlier this year I pulled a few things off my rig, just now getting around to making a sale thread. Everything is FIRM. Parts located in Saint Louis, 63131.
-Thule 450R + Square bars + locks - $150 + shipping. Used these on my gobi Stealth, makes it 10 times easier to mount an RTT to the rack. Missing 1 rubber end cap.
-Pioneer Avic Z120bt + ASWC steering wheel controls + 30 pin ipod connector + misc harnesses. $200 + shipping. Double din head unit, has navi but will need to be updated, gps unit needs to be newly wired/soldered, same with the mic. If navi is not needed, unit works perfectly, plays cd's/dvds, works with an older 30 pin ipod (been using my 160 classic this whole time).
RIGIDS PLEASE READ BEFORE BUYING.
All the rigids came off my old Gobi Stealth. The coating has seen better days. I have no use for these lights anymore, they can't fit my new rack. A new coating of high heat temp spray paint would make them look new. All lights are in perfect working order. 1 of the 7 lights has a tiny bit of condensation in it. Wiring has been trimmed, so if you need more wiring, you'll have to use quick disconnects or solder new wiring in. No switches or any other accessories will be included. My setup for the rack was:
Front - SR 6"- Flood/Specter/Specter/Flood
Sides- SRM floods
Rear- SR 6" Flood/flood
The 4 fronts will included the U-Cradles (about $20 each from rigid) for free. I only have one SRM left, will include the rigid bar mount for Gobi for free.
- Rigid Industries SR 6" Specter x2- $150 each (slight condensation in one ($130 each) of two)
- Rigid Industries SR 6" flood x4 - $125 each
-Rigid Industries SR-M Flood - $50
SOLD
-Driver side 14+ tail light. It's missing 1 mounting screw. SOLD
-Thule 450R + Square bars + locks - $150 + shipping. Used these on my gobi Stealth, makes it 10 times easier to mount an RTT to the rack. Missing 1 rubber end cap.
-Pioneer Avic Z120bt + ASWC steering wheel controls + 30 pin ipod connector + misc harnesses. $200 + shipping. Double din head unit, has navi but will need to be updated, gps unit needs to be newly wired/soldered, same with the mic. If navi is not needed, unit works perfectly, plays cd's/dvds, works with an older 30 pin ipod (been using my 160 classic this whole time).
RIGIDS PLEASE READ BEFORE BUYING.
All the rigids came off my old Gobi Stealth. The coating has seen better days. I have no use for these lights anymore, they can't fit my new rack. A new coating of high heat temp spray paint would make them look new. All lights are in perfect working order. 1 of the 7 lights has a tiny bit of condensation in it. Wiring has been trimmed, so if you need more wiring, you'll have to use quick disconnects or solder new wiring in. No switches or any other accessories will be included. My setup for the rack was:
Front - SR 6"- Flood/Specter/Specter/Flood
Sides- SRM floods
Rear- SR 6" Flood/flood
The 4 fronts will included the U-Cradles (about $20 each from rigid) for free. I only have one SRM left, will include the rigid bar mount for Gobi for free.
- Rigid Industries SR 6" Specter x2- $150 each (slight condensation in one ($130 each) of two)
- Rigid Industries SR 6" flood x4 - $125 each
-Rigid Industries SR-M Flood - $50
SOLD
-Driver side 14+ tail light. It's missing 1 mounting screw. SOLD
Last edited:
