Jafrench
Observer
Will get that for you tomorrow. Should be similar to what I've got now.
FS-Taxa Cricket trailer frame-Denver, CO
- Thread starter Jafrench
- Start date
Will get that for you tomorrow. Should be similar to what I've got now.
Landon_Overland
New member
Jafrench
Observer
Sorry I didn't get you this info yesterday.
The rectangular dimensions of the old Cricket frame are ~45" wide and ~100" long. My custom frame was moved inboard 2" on each side to clear the bigger tires with the Timbren axle less suspension so is 41" wide.
The length of the Cricket body is ~140" but it extended beyond the rectangular section of the frame on all sides and significantly at the front. If you look at the pics in the first post of this thread you can just barely see where the body extended beyond the rectangle by looking at the difference in color of the frame.
Because the Cricket body is oddly shaped there was overhang as follows:
Rear: 2.5"
Rear side: 4"
Middle side: 16" (at greatest width of body)
Front: ?
Hope this info helps. Let me know if I can get anything else for you.
The rectangular dimensions of the old Cricket frame are ~45" wide and ~100" long. My custom frame was moved inboard 2" on each side to clear the bigger tires with the Timbren axle less suspension so is 41" wide.
The length of the Cricket body is ~140" but it extended beyond the rectangular section of the frame on all sides and significantly at the front. If you look at the pics in the first post of this thread you can just barely see where the body extended beyond the rectangle by looking at the difference in color of the frame.
Because the Cricket body is oddly shaped there was overhang as follows:
Rear: 2.5"
Rear side: 4"
Middle side: 16" (at greatest width of body)
Front: ?
Hope this info helps. Let me know if I can get anything else for you.
Landon_Overland
New member
Awesome, thank you for all the help!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
