2015 with a bunch of thuren fabrication and carli goodies. King 2.5's.
Takes me everywhere
Did you build or buy you're bed rack? I'm looking for a very similar setup.
Full Size Dodge Thread
- Thread starter HiddenCamper53
- Start date
Did you build or buy you're bed rack? I'm looking for a very similar setup.
Trophycummins
Adventurer
gunpainter
Observer
Built it myself.
Wonder if that could be adapted to use on a rambox equipped truck. Would you just narrow it a bit to adapt it, and use the rails in the bed to carry the weight?
Branden
Trophycummins
Adventurer
Adapted? I wouldn't. But one could be made to fit a Rambox truck no problem. Any competent fabricator can make one of these racks, it wasn't hard.
Sent from my iPad using Tapatalk
gunpainter
Observer
I meant along the lines of altered so that it would work with the rambox, which i'm assuming would just be using narrower cross members between the sides. I'm trying to sort out who here in kansas city has the capability to fab one up. I have a few friends with welders, and access to a machine shop (well, more of a gunsmithing machine shop, but a cnc mill can be handy), and i'm a painter so I could coat it myself. I'm just not sure if I personally have the skill to do it, and i'm also not sure what the weight limits are for the rails that come in the rambox.
Branden
Trophycummins
Adventurer
You can always add bed supports if you fear the bed rail is going to flex.
Just find someone that deals with race car fabrication. Anyone that can build roll cages will have the tools to build a rack. A good tubing bender with good dies is essential. Don't buy pipe either, get good structural tubing like DOM.
Sent from my iPad using Tapatalk
Nicaragüense
Observer
425k miles and still kicking. Found a replacement bed too since the old one was falling apart.
frojoe
Adventurer
Joe's truck "Sally"
Here's my 1998.5 24V 5spd. 240,000km and just completed a ~5,000km trip around northern BC and dipping into Yukon and Alaska. Has Thuren front coils, sway bar, and Fox 2.0 shocks, another brand tubular control arms, RedHead steering box, and DOR track bar. Currently figuring out a custom Chevy 64" leaf spring rear suspension swap. Has 35" Firestone MT's on 17"x9" ProComp steelies, onboard air with a 5gal tank, exhaust brake, front and rear [small] LED lights, an inverter, a Truckfridge 51qt fridge powered by a 3rd battery on a circuit breaker, and a fullsize spare holder and jerry can rack along with a bed sleeping platform in the bed. Everything has been serviced, installed, or fabricated by myself.
Here's my 1998.5 24V 5spd. 240,000km and just completed a ~5,000km trip around northern BC and dipping into Yukon and Alaska. Has Thuren front coils, sway bar, and Fox 2.0 shocks, another brand tubular control arms, RedHead steering box, and DOR track bar. Currently figuring out a custom Chevy 64" leaf spring rear suspension swap. Has 35" Firestone MT's on 17"x9" ProComp steelies, onboard air with a 5gal tank, exhaust brake, front and rear [small] LED lights, an inverter, a Truckfridge 51qt fridge powered by a 3rd battery on a circuit breaker, and a fullsize spare holder and jerry can rack along with a bed sleeping platform in the bed. Everything has been serviced, installed, or fabricated by myself.
Last edited:
carpenterbruce9
New member
Dodge is really a powerful truck .. especially the cummins.=)
Bcmmp9
Observer
My 2003 Ram 1500 build. 5.9(360) 17in Method standards(waiting on 2 rims), 305/70/17 Nitto ridge grapplers(waiting on 2 tires), Rough country leveling kit, 1in rear lift, Fox shocks, ARE camper shell, K&N intake, JBA headers, K&N intake, Hemifever tuner, Fastman 52mm throttle body, Hid's. I got parts at the house to install and still waiting on parts to come in. Looking at installing a yakima roof rack on my camper shell soon. I'm looking into buying a CVT tent in the future. I do a lot of hiking and camping so it will work out great. I know not many people build 1500's but its what I have and can afford until next year when I can get a mega cab 2500. For right now I know what its capable of and she's took me wherever I have wanted to go. I'll post more pics when I get them there are a few weeks old. Overtime has kept me from getting out much.
Wh1t3nukle
I gotz dis
Wheelers for the Wounded of CA events this year
Fordyce
Rubicon
Soup Bowl
https://www.youtube.com/watch?v=GpR8fpzNXQE
Misc
Fordyce
Rubicon
Soup Bowl
https://www.youtube.com/watch?v=GpR8fpzNXQE
Misc
Gatordoc
Adventurer
Any updates on your DIY camper? Your build thread hasn't been updated in a Looooooooong time!
Cheers!
Sent from my SM-N900V using Tapatalk