I really like the look of the factory hitch. Is the trailer harness the box mounted on the left side?Here are pics of the Mitsubishi OEM hitch.
![]()
![]()
Here is the 4 pin flat connection and another view of the hitch. This was before I added to the brake controller and 7 pin plug.
![]()
Here is a better picture of the receptacle that I added with the brake controller - kinda nice to have all of it in one plug.
This is what is mounted flush in the rear panel in my earlier pics.
![]()
Yeah I agree! Did you have that imported?That Asfir skid plate is pretty cool.
Here is the 4 pin flat connection and another view of the hitch. This was before I added to the brake controller and 7 pin plug.
![]()
Here is a better picture of the receptacle that I added with the brake controller - kinda nice to have all of it in one plug.
This is what is mounted flush in the rear panel in my earlier pics.
![]()
Uh...well you won't like it, but you'll need an open ended wrench and about a half an hour... It's one of those bolts you move 10 degrees, flip the wrench around and move it 10 degrees, repeat ad nauseum. I installed the curt hitch a few weeks back and it works well once you get that bolt out.