Getting an ADV bike backwards into a cargo trailer.

[FR_off_road]

I bought a 6x12 cargo trailer conversion and want to haul my motorcycle backwards in it. This is due to the twin murphy bed setup I have in the front. Ideally I’d like to be able to just spend a night at a gas station for the longer trips and save the hotel until I need a shower.
I tried to push my bike up a similar incline as the ramp with bad results as ther is no good way to push the bike from the front. I have 12v so I’m thinking a small winch is the way to go. Either a ATV small winch or a Harbor Freight el cheapo special.
I'm open to suggestions or other ideas. Let me know what you think.
thanks.

 

[Kingsize24]

Grab the handlebars and walk back with the bike. Done

 

[FR_off_road]

Well. just tried that on my driveway with a 6 degree incline. It was doable but not great. The bike is 425lb or so. The trailer ramp angle is going to require double the force or so. After a day of riding I may not be able to make that work. Will try on trailer when I get it home.

 

[Kingsize24]

Well. just tried that on my driveway with a 6 degree incline. It was doable but not great. The bike is 425lb or so. The trailer ramp angle is going to require double the force or so. After a day of riding I may not be able to make that work. Will try on trailer when I get it home.

Sheesh. Yes at 425 that's quite a task I can imagine, but it's generally the best way if you want to back something on instead of riding it on.