Good luck Kiichiro!! From a 460 to a Prado 150 MC (後期)
- Thread starter GreenbowCounty
- Start date
GreenbowCounty
New member
Been a while since I've updated but started on the Prado conversion. Only thing left in the rear is the emblem swap but that will be a simple item. In the back the LC Prado clears have been installed replacing the OEMs. For the most part a straight forward set up however there was some splicing. The back up lights on the GX are in the rear bumper where as on the Prado they are in the housing. Also, there is an extra bulb in the GX tail light housing unlike the Prado. All buttoned up and functional without issue. The bumper is a sport bumper; the aftermarket lights I got for it were too flimsy so I opted to get something that could function as a utility light on demand. Enter the Extreme LED Stackerz. These things aren't bad. Wasn't looking to get into lighting quite so quickly but it was easier to do these now as opposed to waiting. Today I swapped the GX license plate holder with the Zenki Prado 150 one. Took me a little over an hour and would have been shorter had I had all my tools out and ready beforehand. All in all the truck is coming along nicely; once the front is converted I'll be getting it wrapped and then on to electronics, etc. Cheers!
GreenbowCounty
New member
Haven't spent much time on the 460 at all recently but just a couple of minor updates. Cleaned up the rear and will dip the license plate garnish tomorrow. The Toyota emblem attaches to the left and lower right holes unlike the Lexus emblem which uses the left and upper rights. All in all like how it came out. Be glad to get this finished. 
GreenbowCounty
New member
Also, started in on the front update but hit a snag in the form of I need to get the Prado Kouki (late model) fenders and hood. The front disassembles without much fuss but having the Premium with the headlight washers you want to drain all the washer fluid. I hope to have a hood and fenders by the end of the month.
