mep1811
Gentleman Adventurer
I swapped out a grab handle bolt with a RAM mount ball. The ball needs to be pushed out to clear the handle . I just used some washers to space out the ball. .
Now I can locate my InReach on the P/S up high against the windshield and out of the way.
These are the parts I needed . I used 1/4 " washers as spacers.
Hope this comes in handy for someone else.
Now I can locate my InReach on the P/S up high against the windshield and out of the way.
These are the parts I needed . I used 1/4 " washers as spacers.
Hope this comes in handy for someone else.
Motorcycle M8 Bolt Handlebar Clamp Mounting 2.5 cm Ball: RAM Mounts: Amazon.co.uk: Car & Motorbike
Motorcycle M8 Bolt Handlebar Clamp Mounting 2.5 cm Ball: RAM Mounts: Amazon.co.uk: Car & Motorbike
www.amazon.com
Attachments
-
IMG_20200110_171040386.jpg88.3 KB · Views: 99
-
IMG_20200110_171058653.jpg83.1 KB · Views: 90
-
IMG_20200110_171135660.jpg77.7 KB · Views: 91
-
IMG_20200110_171633630.jpg148.7 KB · Views: 85
-
IMG_20200111_172819954.jpg71.6 KB · Views: 85
-
IMG_20200111_172917287.jpg63.6 KB · Views: 84
-
IMG_20200111_172943930.jpg76 KB · Views: 88