Greaseable leaf spring bolts for 02 Tundra?

[Flyer69]

I've searched high and low, and I can't seem to find any greaseable pins for the 1st gen Tundra. I'm replacing my stock shackles with a greaseable set from Archive Garage, and I want greaseable pins for the leaf springs also. Can anyone point me in the right direction?

Thanks!

 

[toddz69]

What are the sizes of the bolts?

Todd Z.

 

[aknightinak]

I've searched high and low, and I can't seem to find any greaseable pins for the 1st gen Tundra. I'm replacing my stock shackles with a greaseable set from Archive Garage, and I want greaseable pins for the leaf springs also. Can anyone point me in the right direction?

Thanks!

I would try 4crawler.com. The site's an antique and doesn't list the Tundra, specifically, but he's a renowned Toyota guy, so I'd be surprised if he couldn't help you out. I had a set of his shackles on my T100. Everything about them was stout.
14, 16, or 18 mm?
There's a good chance he has the bolt under another application or, if not, can easily get the length and diameter you need.

 

[toddz69]

Thanks for linking that website - it's nigh next to impossible to find via web searches. I agree that he makes great stuff - he made some custom spring wedges for me probably 20 years ago and they're still going strong.

Offroad Design has greaseable bolts as well.

Todd Z.

 

[Verkstad]

You can always make then from originals.
A lathe would be optimal, Drillpress second.
But with care simple handtools can work.