Hannibal 1.2M owners if any?

[xcmountain80]

If you recall I rebuilt my Hannibal about a year ago. When I bought the tent in disrepair it didn't come with the rain fly. I had the cover redone because of the amount of holes in the original. What I need is the measurements of the fly laid on the ground (L & W). I have the poles so if the measurements are accurate I will be able to duplicate it. Or if you have another Hannibal model let me know which one and we can measure your tent foot print vs. the cover size and go from there.

Aaron

 

[Lost Canadian]

I have a 1.4. The fly measures 2.9 meters long and 1.4 meters wide. I measured the width is from the inside seams.

 

[xcmountain80]

Awesome, If you would get me a measurement from outside to outside including the seam. Or by seem do you mean the edge? And the 1.4 Tent platform measures? I haven't looked it up yet.

AAron

 

[Lost Canadian]

The 1.4 is the same length as the 1.2 it's just 0.2 meters wider. As for the cover measurement, that's from the outside edge. There are 4 triangular corner pieces though that extend it a bit further. It's an odd shape cover as you may or may not know. The main rectangle piece is 2.9 L x 1.4 W meters, at the four corners of the main rectangle though the triangular pieces are sewn and they measure 88mm L x 70mm W.

 

[xcmountain80]

Ahh I see! Well in a matter of speaking. No I do not know what the cover looks like but know that I can have one made. I'm going to make it look similar to the Ezi Awn just a rectangle tarp if you will. Ok well now I have a footprint size and I will measure out and piece of scrap tarp and do a test fit. Prior to going to my canvas guy. I had him make one out of a reinforced vinyl or pvc, it turned out nice for $110. I had the old cover on it and it had way to many holes to patch, so I finally broke down and had one made.

Aaron