Well 2 weeks ago I joined the Mitsu community and picked up a 1995 SR with 158,000 miles. First night I pulled the running boards off ,then put a set of 31 inch tires I has for my Scout 800a on the factory wheels. Next I replaced the rear sway bar endlinks,one was broken. Today I put 4 new Bilsteins in. Shakedown went great. So I decided to see if the 4WD,diffs were working correctly.
2wd to 4wd was ok,but when shifting to 4wdlc the center diff lock light just kept flashing? and rear diff lock wouldnt light when hitting the switch?


Where do I start troubleshooting? I believe the previous owner rarely used the diff locks.
I have downloaded the FSM and will look at it tomorrow ,but any advice would be appreciated.
cheers,
Jerry
2wd to 4wd was ok,but when shifting to 4wdlc the center diff lock light just kept flashing? and rear diff lock wouldnt light when hitting the switch?

Where do I start troubleshooting? I believe the previous owner rarely used the diff locks.
I have downloaded the FSM and will look at it tomorrow ,but any advice would be appreciated.
cheers,
Jerry