jayrguidaben chevy silverado z71 build
- Thread starter jayrguidaben
- Start date
jayrguidaben
Observer
Just installed the tires this weekend. Love the tires! No complains or anything. It doesn't sway on the highway at 60mph above. I little hum on the road but its tolerable. Tried different psi and 46-48psi is perfect for this truck. Sometimes i rub on a full turn while reversing.
jayrguidaben
Observer
Plasti dip is holding up great. No chips from rocks in the front bumper and grill. Very happy with it. Thanks!
jayrguidaben
Observer
Anybody knows a hidden winch for '07.5-'12 chevy silverado?
jayrguidaben
Observer
update on my build. i'm preparing our vehicle to go to yellow stone 
new led light bars
viair ultra duty onboaird air system
switches
new led light bars
viair ultra duty onboaird air system
switches
jayrguidaben
Observer
drawer system
diy drawer system
i used skateboard bearings for the drawer
diy drawer system
i used skateboard bearings for the drawer
jayrguidaben
Observer
all done
i used shurflo 12v Water Pressure Diaphragm Pump 4.3 L/min 1.2 GPM 35 PSI -
on the left is the release pressure for the tank and the left is for the water.
i used shurflo 12v Water Pressure Diaphragm Pump 4.3 L/min 1.2 GPM 35 PSI -
on the left is the release pressure for the tank and the left is for the water.
jayrguidaben
Observer
the only complain on my drawer system is i should have use 1/2 plywood instead 3/4. this thing is heavy!
jayrguidaben
Observer
dual battery set up. i used cole hersee for my isolators
die hard marine battery from sears group size 34m
die hard marine battery from sears group size 34m
Larry
Bigassgas Explorer
Cool Silverado Jay. Love the bed system!
Did you drill holes in the air filter housing for the fuse box? That may not have been a good idea as that is the clean air side of the filter where dirt can be sucked through any mounting bolts holding the fuse box down to the air filter housing straight into the engine. You would be surprised to see how an engine can suck dirt through the tinniest of holes in the air induction piping or air cleaner housing. Might want to pull the cover off and see if there is any dirt witness tracks on the bottom side of the cover.
Did you drill holes in the air filter housing for the fuse box? That may not have been a good idea as that is the clean air side of the filter where dirt can be sucked through any mounting bolts holding the fuse box down to the air filter housing straight into the engine. You would be surprised to see how an engine can suck dirt through the tinniest of holes in the air induction piping or air cleaner housing. Might want to pull the cover off and see if there is any dirt witness tracks on the bottom side of the cover.
jayrguidaben
Observer
Cool Silverado Jay. Love the bed system!
Did you drill holes in the air filter housing for the fuse box? That may not have been a good idea as that is the clean air side of the filter where dirt can be sucked through any mounting bolts holding the fuse box down to the air filter housing straight into the engine. You would be surprised to see how an engine can suck dirt through the tinniest of holes in the air induction piping or air cleaner housing. Might want to pull the cover off and see if there is any dirt witness tracks on the bottom side of the cover.
thank you larry but no i didn't drill a hole on the air box. i just use double sided tape. its been their for 2 years now and its holding great.
Larry
Bigassgas Explorer
jayrguidaben
Observer
i know but thank you! :iagree:
jeremymdavidson
New member
Could you give me some info in the switches you have?