Jeep-5O's Trailer Project
- Thread starter Jeep-5O
- Start date
Got her back from the sandblaster and started on the body work. I chose to fill all the holes (about 50 or so) with body solder.
Back from the blaster with a wash coat of industrial primer.
Prepping the holes before tinning...
Soldered and ground down....
Sanded and primed...
Back from the blaster with a wash coat of industrial primer.
Prepping the holes before tinning...
Soldered and ground down....
Sanded and primed...
I didn't have much time today to fully document the progress, however; I was able to get three of the four sides done.
All I have left is the rear (only 4 holes), the floor (20 holes) and several in one of the fenders where a fire extinguisher was mounted (I might leave those and remount the exitinguisher).
Allot of work, however; WELL WORTH IT!!!!
All I have left is the rear (only 4 holes), the floor (20 holes) and several in one of the fenders where a fire extinguisher was mounted (I might leave those and remount the exitinguisher).
Allot of work, however; WELL WORTH IT!!!!