theendresult
New member
This Jeep is professionally built with an utmost attention to detail.
Appraised at $55,000.
**It is currently registered in Alberta, Canada but will be located in the Shuswap until the end of June.
Has less than 1500kms since being built. 75% of that was on the street. Never been in the mud.
3.3L Intercooled Cummins Turbo Diesel mechanical injection. (new crate engine)
NV3550
NP231 with AA 32 spline short shaft kit, all rebuilt
1350 CV driveshaft
Dana 60 rear 4.88 Detroit locker
Dana 44 hi pinion front, 4.88, Yukon air locker, Yukon chromoly axles
4 wheel hydroboost disc brakes
37-12.50-17 BFG KO's on steel rock crawlers
4 link rear
3 link front with pan hard
Lower links 2" 7075 Aluminum with 1 1/4" Currie Johnny joints
Upper links 1.75" 7075 Aluminum with 1" Currie Johnny joints
3.5" Rubicon Express Coils
Bilstein 5100's
Wheelbase stretched 4" front 3" rear
Custom front and rear bumpers
Aluminum high clearance fuel tank with steel skid
Full cage
Functioning factory guages except RPM's
Pyro/Boost gauge
Bedlined tub
Twisted stitch suspension seats
Poison Spyder front fenders
Xenon rear flares
50" LED light bar
8000 Lb Warn winch
Full frame off build, everything powder coated
Rear storage trunk
On board air
Led Headlights
Led Brake/reverse/running lights
All custom parts have been CAD'ed and laser cut
$25,000 CDN OBO
Appraised at $55,000.
**It is currently registered in Alberta, Canada but will be located in the Shuswap until the end of June.
Has less than 1500kms since being built. 75% of that was on the street. Never been in the mud.
3.3L Intercooled Cummins Turbo Diesel mechanical injection. (new crate engine)
NV3550
NP231 with AA 32 spline short shaft kit, all rebuilt
1350 CV driveshaft
Dana 60 rear 4.88 Detroit locker
Dana 44 hi pinion front, 4.88, Yukon air locker, Yukon chromoly axles
4 wheel hydroboost disc brakes
37-12.50-17 BFG KO's on steel rock crawlers
4 link rear
3 link front with pan hard
Lower links 2" 7075 Aluminum with 1 1/4" Currie Johnny joints
Upper links 1.75" 7075 Aluminum with 1" Currie Johnny joints
3.5" Rubicon Express Coils
Bilstein 5100's
Wheelbase stretched 4" front 3" rear
Custom front and rear bumpers
Aluminum high clearance fuel tank with steel skid
Full cage
Functioning factory guages except RPM's
Pyro/Boost gauge
Bedlined tub
Twisted stitch suspension seats
Poison Spyder front fenders
Xenon rear flares
50" LED light bar
8000 Lb Warn winch
Full frame off build, everything powder coated
Rear storage trunk
On board air
Led Headlights
Led Brake/reverse/running lights
All custom parts have been CAD'ed and laser cut
$25,000 CDN OBO
Attachments
Last edited:
