Jk fog light size?
- Thread starter jhill15
- Start date
jhill15
Explorer
Hilldweller
SE Expedition Society
4"
If those really are 3", they wouldn't fit a JK.
If those really are 3", they wouldn't fit a JK.
jhill15
Explorer
That's what I'm kinda worried about. If you notice in the picture the tabs to mount them are further out than the ring so I'm wondering if that is where it's 4 inches. Does the bumper cover around the fog lights have trim that cover some of the light assembly? Cause these say the outer hole diameter is 3"
Sent from my LG-H900 using Tapatalk
Hilldweller
SE Expedition Society
I threw out my stock bumper...
The hole is definitely bigger than 3" though. The hole on my aftermarket bumper is like 3 7/8" or so.
They either got the 3" thing wrong or they're selling the wrong part.
Maybe if you looked on the Omix-ADA website, cross-reference parts for both vehicles? Might come up with a common part.
jhill15
Explorer
I'm thinking the same thing, they either have the measurement listed wrong or...they are selling the turn signal guard and are saying it's for the fog light.I threw out my stock bumper...
The hole is definitely bigger than 3" though. The hole on my aftermarket bumper is like 3 7/8" or so.
They either got the 3" thing wrong or they're selling the wrong part.
Maybe if you looked on the Omix-ADA website, cross-reference parts for both vehicles? Might come up with a common part.
I will check out that website and see if I can find out the difference in diameter between the two.
I dig your bumper, a buddy at work has either the same one, or one that's very close.
Thanks for the help man!
Sent from my LG-H900 using Tapatalk
Hilldweller
SE Expedition Society
I liked your idea about the turn signals so I went out and measured. 3.5".
Even the side signal is 2.5".
Nothing is 3" on the JK....
There's something screwy about it. You need to find the manufacturer and check with them. Or find another product...
Even the side signal is 2.5".
Nothing is 3" on the JK....
There's something screwy about it. You need to find the manufacturer and check with them. Or find another product...
jhill15
Explorer
Other than maybe half an inch in diameter and different mounting points they are pretty much the same. I think I can make them work...as long as they don't show up 3" lol.
Sent from my LG-H900 using Tapatalk
jhill15
Explorer
Hmmmm yeah something isn't right then. hopefully they will work...worst case I gotta keep searching for the right size guard. I could always check and see if the guy I work with wants them for his turn signals. They would be sweet...although sweeter on my fogs lol.
Sent from my LG-H900 using Tapatalk
Hopeless Diamond
Explorer
happen to have a stock bumper laying around. Picture of openings, front and rear...
jhill15
Explorer
Nice!!!!! That pretty much sums it up! Thank you for going out and measuring!!!
Sent from my LG-H900 using Tapatalk