Leaf Packs

[climber-420]

I have searched, so don't harrass. I have an 03', sittin on a 6inch Fabtech Suspension lift, and the leafs in the back are now flat. I was thinking either the 4 or 5 pack from Wheelers. Any other suggestions, and/or places to get them from, or sizes? What's the best to go with the lift that i am running right now. Not to savvy like the rest of you guys who know so much. Thanks for all the help. Peace

 

[sasaholic]

alcan or deaver and tell em what u need. there isnt an available off the shelf pack that will give u the lift u need without using longer shackles or blocks.

 

[01tundra]

Alcan's been good for me on all four corners for several years now, had Deaver's in the rear a long time ago.

 

[Arvin G]

Are you still running the blocks in the rear? If so, you can get rid of them and go custom Alcan or Deavers. You can also ditch the blocks and go with Allpro's 5inch leaf pack and 1.5in longer shackles. If you carry a lot a weight then I would go with a custom pack as Allpros springs from my personal experience don't allow for much loading capacity. If you still have blocks then you can rebuild your pack or go with the wheelers replacements as you indicated.

 

[climber-420]

So I called Deaver the other day and he told me what I suspected, that the Fabtech blocks and rear end is a piece of ********. I am gonna take out the old leafs/blocks/etc etc, and go with a 6inch custom leaf from Deaver. $250 a side. Custom made for me, can't wait to get these bad boys. Thanks for all the help and answers.:victory:

 

[BeachBoy]

one more vote for alcan

my leafs are exactly as I asked them.. 3" lift with 300# and very flexy.

very good service and product