Lifts for a Frontier

[mcm4090]

Got my PRG lift in today, now all I have to do is install it. Any tips?

I good 6 point socket to remove the 3 nuts on the top OEM shock.
Jack up the lower control arm enough to relieve pressure on the lower shock mount bolt to remove it.

 

[AlabamaWill]

Mauricio: I would call Greg back it can be hard to get ahold of him sometimes.
Mike: Thanks for the advice.

 

[AlabamaWill]

Ok, I installed the rear AAL's and shock's as well as the upper A-arms but could not get the bottom factory coilover bolt out of the Lower A-arm. Any suggestion.

 

[mcm4090]

Will the bolt spin or is it frozen in place? Is the top of the shock still bolted in?

 

[AlabamaWill]

Mike the top is bolted in and the bottom bolt is frozen. I had a half inch foot and half long breaker bar on it and it still didnt move.

 

[mcm4090]

I had a half inch foot and half long breaker bar on it and it still didnt move.

Oh so the nut is frozen on to the bolt. Get a Propane Torch and heat up the nut. That should help you loosen the nut.

Here is what one looks like.