Lock N' Roll Trailer Hitch modified $100

CJ2AinAZ

New member
The original parts...
(P/N 202) Weld on 6000 lb coupler
6000 Ib Gross Trailer Weight

P/N 303) Adjustable Height Drop/Rise Bar Hitch
6000 lb Gross Trailer Weight

MODIFIED!
For OFFROAD USE ONLY, BUYER AGREES TO HAVE WELDS INSPECTED

Ok, now that I have that out of the way. I bought this a few years ago, for my trailer/jeep. I modified it and welded it to a standard receiver hitch. The vehicle portion is pretty long. I will cut for buyer if requested. You will need to drill a new hitch pin hole. This hitch cannot be raised or lowered without removing and fabing a new mount.

The "ball mount" stud is gone, also I grinded hitch back a bit to gain travel

The Vehicle portion is the standard part above, just welded to the receiver tube that fits OVER the standard 2x2 receiver.

I actually prefer my pintle as I can jacknife the trailer. This hitch will really only go slightly past 90 as you can see in the hitch.

Location SW/Central Tucson work/home. Can ship, payment by cash or paypal if you are out of town. Est shipping in AZ <$20

$100 for the hitch
 

Forum statistics

Threads
189,958
Messages
2,922,673
Members
233,207
Latest member
Goldenbora
Top